首页> 美国卫生研究院文献>ACS Omega >Mechanism of Cs Removal from Fukushima Weathered Biotiteby Heat Treatment with a NaCl–CaCl2 Mixed Salt
【2h】

Mechanism of Cs Removal from Fukushima Weathered Biotiteby Heat Treatment with a NaCl–CaCl2 Mixed Salt

机译:福岛风化黑云母中Cs的去除机理通过用NaCl–CaCl2混合盐进行热处理

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

An in situ extended X-ray absorption fine structure (in situ EXAFS) spectroscopic analysis at high temperature was conducted to investigate the mechanism of Cs removal from weathered biotite (WB) from Fukushima, induced by heating with a mixed salt of NaCl and CaCl2. This indicated that most Cs remained in WB during heating at 200–700 °C. In addition, the in situ EXAFS spectra gradually changed on heating with the mixed salt and a completely different spectrum was observed for the sample after cooling from 700 °C to room temperature (RT). Ex situ EXAFS measurements and X-ray fluorescence analyses were also conducted on samples after heat treatment and removal of the mixed salt to clarify the temperature dependence of the Cs removal ratio. On the basis of the results of radial structure function analysis obtained from in situ EXAFS, we concluded that almost all of the Cs was removed from WB by heating at 700 °C with the mixed salt, and that Cs formed Cs–Cl bonds after cooling to RT from 700 °C. In contrast, although more than half of the Cs presentwas removed from WB by heat treatment at 500 °C, most Cs wassurrounded by silica tetrahedrons, maintained by Cs–O bonds.On the basis of these results, different Cs removal processes aresuggested for the high-temperature (600–700 °C) and low-temperature(400–500 °C) regions.
机译:进行了高温下的原位扩展X射线吸收精细结构(原位EXAFS)光谱分析,以研究通过与NaCl和CaCl2的混合盐加热而从福岛的风化黑云母(WB)中去除Cs的机理。这表明在200–700°C的加热过程中,大多数Cs保留在WB中。此外,原位EXAFS光谱在用混合盐加热时逐渐变化,从700°C冷却至室温(RT)后,样品的光谱完全不同。在热处理和去除混合盐后,还对样品进行了异位EXAFS测量和X射线荧光分析,以阐明Cs去除率的温度依赖性。根据从原位EXAFS获得的径向结构函数分析的结果,我们得出结论,通过在700°C下与混合盐加热,几乎所有Cs都从WB中去除,并且Cs在冷却后形成Cs–Cl键从700°C到室温。相反,尽管存在超过一半的C通过在500°C的热处理从WB中去除,大多数Cs为被Cs–O键维持的二氧化硅四面体包围。根据这些结果,不同的Cs去除过程是建议用于高温(600–700°C)和低温(400–500°C)地区。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号