The phone in idle mode, idle parameter to select the cell resides. If the idle parameter set properly, the user fails when selecting a cell resides in best cell, so that the lower the level of active users, the quality is not up to the best, the impact of user perception, and even lead to dropped calls and other phenomenon. Now with new sites constantly network, the GSM cell coverage is more dififcult to control. In this case set the idle argument was particularly important. But now idle parameters set by way of a region usually be a ifxed value, so the more rigid, therefore, the article proposes a new design parameters on the basis of the original parameters.%手机在空闲模式下,通过空闲参数来进行驻留小区的选择。若空闲参数设置不当,用户在选择小区时未能驻留在最佳小区,使得用户的激活状态下电平、质量都达不到最好,影响用户感知,甚至导致掉话等现象的产生。目前随着新建站的不断入网,GSM小区的覆盖范围更加难以控制。此时空闲参数的设置显的尤为重要。但是目前空闲参数的设置通常是以某一区域固定值的方式进行,这样较为呆板,因此,文章在原有参数基础之上提出新的参数设计方案。
展开▼