纯铜在低温和极低应变速率下的初始蠕变和粘弹性回复

摘要

Creep and anelastic backflow behaviors of pure copper (4N Cu) with grain size dg=40 μm were investigated at low temperatures of T<0.3Tm (Tm is melting point) and ultra-low creep rates of e&≤1×10−10 s−1 by a high strain-resolution measurement (the helicoid spring specimen technique). Analysis of creep data was based on the scaling factors of creep curves instead of the conventional extrapolated steady-state creep rate. Power-law creep equation is suggested to be the best for describing the primary transient creep behavior, because the pre-parameter does not apparently change with elapsed time. The observed anelastic strains are 1/6 of the calculated elastic strains, and linear viscous behavior was identified from the logarithm plot of the anelastic strain rate versus anelastic strain (slope equals 1). Therefore, the creep anelasticity is suggested to be due to the unbowing of there-dimensional network of dislocations.%采用高应变分辨率的螺旋弹簧蠕变试验法，研究晶粒尺寸dg为40μm纯铜在低温(T