MWCNTS/SiC composites were fabricated by aqueous tape casting. High solid content (50 vol%) SiC slurries with sintering additives and multi-wall carbon nanotubes (MWCNTs) as reinforcements were prepared using Tetramethylammonium hydroxide as the dispersant. The stability of MWCNTs/SiC slur-ries was studied and characterized in terms of zeta potential and rheology measurements. The relative density of the composite was about 98% after hot-pressing at 1850℃ (at 25 MPa in Ar for 30 min). The hardness of the composites decreased with the increase in MWCNTs content. The flexural strength and the fracture toughness were 742.17 MPa and 4.63 MPa·m1/2, respectively when the MWCNTs content was 0.25 wt%. Further increase in MWCNTs content to 0.50 wt% did not lead to the increase in mechanical properties. Most of MWCNTs were found to be located at SiC grain boundaries and the pull out of the MWCNTs was observed.
展开▼
机译:The preparation and the in-vitro pharmacodynamics study of the intracapsular sustained-release preparations for the prevention of posterior capsule opacification
机译:How the Group Leaders of Lesson Preparation Groups Facilitate Group Learning and Reflective Practice in Chinese Public High Schools =中国公立高中的备课组长是如何引领团队学习和反思性实践的?
机译:神父市政厅,宗教自由和天主教传统。真实地狱中的均一教义发展案例,阿巴耶·圣马德琳(Les Barroux),第二版。修订和扩充,1998年,T。I,系统学,第一期:Preparations,LX + 466页。第二期:成果,278页。 T. II,编年史,总理专着:资料来源,第594页。第二期:所附文件,430页。 T. III,按字母顺序,第一期:参考书目,552页。第二期:一般分析索引,540页。