FeⅡEDTA/(NH4)2SO3溶液吸收脱除NO的工艺研究

摘要

为研究Fe Ⅱ EDTA/(N H4)2SO3溶液吸收脱除NO的效果,考察了吸收脱除过程中(NH4)2SO3浓度、FeⅡ EDTA初始浓度、烟气流量、pH、温度、入口NO浓度、ψ(O2)等因素的影响.通过设计正交试验,确定主次因素关系和最佳工艺条件.结果表明:各因素对NO吸收脱除效果的影响由大到小的顺序为FeⅡ EDTA初始浓度＞入口NO浓度＞温度＞ψ(O2)＞烟气流量＞pH＞(NH4)2SO3浓度;FeⅡEDTA/(NH4)2SO3溶液吸收脱除NO的最佳工艺条件为FeⅡ EDTA初始浓度0.005 mol/L、入口NO浓度1 072 mg/m3、温度30℃、ψ(O2)4％、烟气流量800 mL/min、pH=7、(NH4)2SO3浓度0.2 mol/L,此时NO最大脱除率达到92.5％,NO吸收量为3.28 mol/mol.%The effects of (NH4)2SO3 concentration,initial FeⅡEDTA concentration,gas flow rate,pH,temperature,NO concentration,and oxygen concentration in feed gas on NO removal by FeⅡ EDTA/(NH4)2 SO3 solution were investigated.The primary and secondary influence factors and the best process conditions were determined by orthogonal test.The results show that the influence order of different parameters on NO absorption is:the initial FeⅡ EDTA concentration ＞ NO concentration in feed ＞ temperature ＞oxygen concentration ＞ feed gas flow rate ＞ pH value ＞(NH4)2SO3 concentration.The optimum conditions for NO removal by FeⅡ EDTA/(NH4)2SO3 solution is:the initial FeⅡ EDTA concentration of 0.005 mol/L,NO concentration of 1 072 mg/m3,30 ℃,oxygen concentration of 4％,the gas flow rate of 800 mL/min,pH of 7,(NH4)2SO3 concentration of 0.2 mol/L.The NO removal rate reaches 92.5％ and the absorption amount of NO is 3.28 mol/mol under the optimum conditions.