首页> 中文期刊> 《颗粒学报(英文版)》 >Effects of the plenum chamber volume and distributor geometry on fluidized bed hydrodynamics

Effects of the plenum chamber volume and distributor geometry on fluidized bed hydrodynamics

         

摘要

Most hydrodynamic fluidized bed models,including CFD codes,neglect any effects of the plenum chamber volume.Experiments were performed in a 0.13 m ID fluidization column to determine plenum chamber volume effects on fluidized bed hydrodynamics for FCC and glass particles.Two low-pressure-drop distributors were used,one with a single orifice,and the other with 33 orifices and the same total open area as the single orifice.The results show two peaks in the frequency spectra for the single-orifice distributor,one representing bubble eruption at the bed surface and the other of higher frequency corresponding to the bubbling frequency at the distributor.The latter decreased slightly with increasing plenum volume and with increasing bed depth.For the multi-orifice distributor,broad frequency spectra from pressure measurements became narrower and moved towards higher frequency with decreasing plenum volume.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号