首页> 中文期刊> 《纳米技术与精密工程(英文)》 >Investigation of material removal characteristics of Si(100)wafer during linear field atmospheric-pressure plasma etching

Investigation of material removal characteristics of Si(100)wafer during linear field atmospheric-pressure plasma etching

         

摘要

Atmospheric-pressure(AP)plasma etching provides an alternative method for mechanical grinding to realize wafer thinning of Si wafer.It can avoid the damages and micro-cracks that would be introduced by mechanical stress during the grinding process.In this study,the material removal characteristics of Si(100)wafer processed by linear field AP plasma generated using carbon tetrafluoride(CF4)as the reactive source were analyzed.This linear field plasma etching tool has a typical removal profile and the depth removal rate that can reach up to 1.082μm/min.The effect ofO2 concentration on the removal ratewas discussed and the surfacemorphology during the process was characterized using scanning electron microscopy.It is shown that the subsurface damage layer was gradually removed during the etching process and the surface was observed to be smoothened with the increase of the etching depth.This present work contributes a basic understanding of the linear field AP plasma etching performance with different gas composition and the typical characteristics would be further applied to damage-free precision removal of Si.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号