香烟滤棒香料线定位技术的改进

摘要

针对香烟滤棒香料线在丝束喷嘴入口处与丝束汇合、进入成型机难以实现准确定位的难题，对KDF2滤棒成型机香料线定位技术进行了改进：在丝束喷嘴支架上开设定位孔，香料线可以调节出口位置的导管，定位孔直接进入冷粘室与丝束汇合．改进结果表明，所生产香线型滤棒香料线定位值平均为3．84 mm，误差小于±1 mm，完全消除了因香料液与热胶接触融合造成滤棒爆口现象，使成品滤棒合格率达到99．44％以上．%Aiming at the problem that the cigarette filter rod spice line was difficult to achieve accurate po-sitioning when it converged into the tow nozzle entrance,according to KDF2 filter rod forming machine,the spice line positioning technology was improved.A positioning hole was arranged on the tow nozzle bracket, it could get into cold bonding room directly converging with tow.The spice line could adjust the export po-sition.The improved results showed that,the fragrance line location value of incense linear filter rod was 3.84 mm on average,the error was less than ±1 mm.It completely eliminated seam open phenomenon when the spice liquid was mixed with hot glue.The qualification rate of filter rod reached 99.44%.