水硬性矿物磷铝酸钙晶体的形成过程研究

摘要

采用溶胶-凝胶法及固相反应法合成水硬性矿物三元磷铝酸钙晶体(CAP),不同温度与保温时间制得样品分别采用X射线衍射、傅里叶变换红外光谱、扫描电子显微镜、能量色散X射线谱进行分析,研究煅烧条件对CAP晶体形成的影响,对CAP在最佳煅烧温度时的形成动力学进行初步研究.结果表明,当煅烧温度为1590℃,保温时间超过0.5 h时,CAP可以大量合成,所得矿物样品中的CAP结晶度高,晶粒尺寸较大,形貌较为完整;形成动力学方程显示,煅烧温度为1590 ℃时CAP形成受混合控制,其描述方程为经验方程,同时Glinstling方程(球形模型)也可对其进行描述.%A hydraulic mineral calcium aluminophosphate(CAP)was synthesized by sol-gel method and solid-state reac-tion. The samples obtained with different calcining temperature and holding time were analyzed by X-ray diffraction,Fou-rier transform infrared spectrum,scanning electron microscope,and X-ray energy dispersive spectrum. The effects of cal-cining conditions on the crystal formation of CAP and the formation kinetics of CAP obtained at the best calcining tempera-ture were researched. The results show that CAP crystal can be synthesized in a large amount when the calcining tempera-ture is 1 590 ℃ and the holding time is more than 0.5 h.The obtained mineral sample has high crystallinity,larger grain size,and more complete morphology.The formation kinetics equation shows that the formation of CAP is controlled by mixing models at the calcining temperature of 1 590℃. The describable equation is the empirical equation,and the Glin-stling equation(spherical model)can also be used to describe.