目的 分析湿建筑材料VOCs散发的规律及其影响因素,以更好地控制由室内污染源产生的VOCs污染.方法 在自制的模拟环境实验舱内,利用PGM-7240手持式VOC检测议和气相色谱仪对湿建筑材料VOCs的散发行为进行试验测试.结果 表明环境温度升高使得材料内VOCs分子热运动加剧,湿材料散发VOCs的速率加快;较高的相对湿度延长了湿材料的干燥时间,正向促进湿材料内部有机化合物的水解反应及VOCs的释放;湿材料涂层越厚,材料内部VOCs总量越多,材料干燥时间越长;较高的换气次数能缩短湿建筑材料的干燥时间.结论 湿材料释放VOCs的速率随环境温度升高而加快;增加相对湿度有助于湿材料VOCs的散发;湿材料涂层厚度与舱内VOCs质量浓度呈正比关系;提高舱内换气次数能有效促进VOCs的衰减.%This paper mainly researches the emissions of volatile organic compounds (VOCs) from wet building materials in order to control the VOCs pollution caused by indoor pollution source more efficiently. The author did a series of tests to the emission using handheld VOC detector PGM-7240 in an environmental test chamber and gas chromatograph. The results show that the ambient temperature, relative humidity, coating thickness of the material and air change rate of the chamber can all have a certain influence on the VOCs e-missions of the wet building materials. This paper draws the following conclusions;the rise of ambient temperature as well as the increase of relative humidity can accelerate the emission of VOCs; the thicker the coating of the material is,the higher VOCs concentration becomes inside the chamber;increasing air change rate of the chamber can improve the decay rate of the VOCs.
展开▼
