Numerical Study on Ridge Ice Accretion and Its Effect Under Thermal Ice Protection

摘要

Under the condition of thermal anti-icing,the liquid water on the leading edge of the airfoil that would flow to the downstream non-protective zone will produce ridge ice,thus endangering flight safety.Based on the existing three-dimensional(3 D)icing model which considers the water film flow on the ice layer,an icing model with thermal boundary condition is introduced.With the boundary conditions of none anti-icing and thermal anti-icing,glaze ice accretion and ridge ice accretion are simulated on a simplified airfoil of unmanned aerial vehicle(UAV),and then the lift coefficient and drag coefficient are calculated and compared with the smooth airfoil under the same conditions.The results show that the lift-drag ratio obviously decreases after glaze ice occurred on the leading edge under the condition of none anti-icing;and that after setting the condition of anti-icing heat flux in the impingement area,the glaze ice on the leading edge becomes thinner and the ridge ice occurs in the non-protective zone,so the airfoil with this icing characteristic gets a lower lift-drag ratio.