Walnut-shell activated carbon(WSAC) supported ferric oxide was modified by non-thermal plasma(NTP), and the removal efficiency for hydrogen sulfide over Fe/WSAC modified by dielectric barrier discharge(DBD) was significantly promoted. The sample modified for10 min and 6.8 k V output(30 V input voltage) maintained 100% H2 S conversion over a long reaction time of 390 min. The surface properties of adsorbents modified by NTP under different conditions were evaluated by the methods of X-ray photoelectron spectroscopy(XPS), Brunauer–Emmett–Teller(BET) analysis and in-situ Fourier transform infrared spectroscopy(FTIR), to help understand the effect of the NTP treatment. NTP treatment enhanced the adsorption capacity of Fe/WSAC, which could due to the formation of micro-pores with sizes of0.4, 0.5 and 0.75 nm. XPS revealed that chemisorbed oxygen changed into lattice oxygen after NTP treatment, and lattice oxygen is beneficial for H2 S oxidation. From the in-situ FTIR result,transformation of the reaction path on Fe/WSAC was observed after NTP modification. The research results indicate that NTP is an effective method to improve the surface properties of the Fe/WSAC catalyst for H2 S adsorption-oxidation.
展开▼
