Patterns of shear band,precursors to shear failure occurring instrain-softening stage,axial,lateral and volumetric strains as well as Poisson's ratio ofplane strain rock specimens in compression for different heights were investigated byuse of Fast Lagrangian Analysis of Continua(FLAC).A material imperfection closer tothe lower-left comer of the specimen was prescribed.For finer mesh,the imperfectionwas modeled by four null elements,while it was modeled by a null element for coarsermesh.FISH functions were written to calculate the entire deformational characteristics ofthe specimen.In elastic stage,the adopted constitutive relation was linear elastic;instrain-softening stage,a composite Mohr-Coulomb criterion with tension cut-off and apost-peak linear constitutive relation were adopted.Height of rock specimen does not in-fluence shear band's pattern(including the thickness and inclination angle of shearband).The slopes of the post-peak stress-axial strain curve,stress-lateral strain curve,lateral strain-axial strain curve,Poisson's ratio-axial strain curve and volumetricstrain-axial strain curve depend on the height.Hence,the slopes of these curves cannotbe considered as material properties.Nonlinear deformation prior to the peak stress is akind of precursors to shear failure,which is less apparent for shorter specimen.For thesame axial strain,lower lateral expansion is reached for shorter specimen,leading tolower Poisson's ratio and higher volumetric strain.The maximum volumetric strain oflonger specimen is less than that of shorter specimen.The conclusions drawn from nu-merical results using finer mesh qualitatively agree with those using coarser mesh.
展开▼
