• 主题
高级搜索  >
历史搜索 清空历史
您现在的位置：首页> 中文期刊>其他>国际煤炭科学技术学报：英文版

国际煤炭科学技术学报：英文版

国际煤炭科学技术学报：英文版

本刊是中国煤炭学会主办的刊物，是向国内外公开发行的英文版煤炭科学技术方面的综合性学术刊物，主要刊载煤田地质与勘探、煤矿开采、矿山测量、矿进建设、煤矿安全、煤矿机械工程、煤矿电气工程、煤炭加工利用、煤矿环境保护等方面的科学研究成果论著和学术论文。
  • 发文量：259
  • 被引量：67
  • H指数：0
  • 开始收录时间：1995,1(1)
  • CNKI综合因子：1.859
  • 维普期刊影响因子： 0.73
  • 万方期刊影响因子：1.46
  • 创刊时间：1995
  • 国内刊号/CN：10-1252/TD
    国际刊号/ISSN：2095-8293
  • 发行周期：季刊
    邮发代号：-
  • 主管单位：中国科协
    主办单位：中国煤炭学会
国际煤炭科学技术学报：英文版-联系信息
  • 主编：Suping Peng;Shimin Liu
  • 电话：010-84262174
  • 邮箱：jcst@chinacs.org.cn
  • 地址：China Coal Research Institute. Rm.1204, Coal Tower.Block13 Hepingjie, Chaoyang District
  • 邮编：100013
国际煤炭科学技术学报：英文版-获奖情况
  • • 卓越计划期刊
  • 收录汇总
  • 刊内文献检索
  • 投稿信息

刊期浏览

国际煤炭科学技术学报：英文版 >2023年第2期

学科

年度

全选（0）
排序：
共4384条结果
  • 摘要：This paper reports new data for arsenic(As)and selenium(Se)in a total of twelve bench samples of Ge-rich and Ge-poor coals in the No.6 coal seam from the Wulantuga ore deposit,Inner Mongolia,Northeastern China.The Gepoor coals are characterized by low-ash(with a weighted average ash yield 10.59%).The coal samples were digested using an UltraClave microwave high pressure reactor(milestone)and trace elements were detected by inductively coupled plasma mass spectrometry—collision/reaction cell technology,a reliable method for As and Se determination in coal samples.The contents of As and Se in the Ge-poor(with a weighted average content of 9.14 and 0.30 lg/g,respectively)and Ge-rich coal samples in the present study(varies from 16.88 to 17,776 lg/g and from 0.26 to 14.39 lg/g,respectively)are in a sharp contrast.The As in the Ge-poor coals is of both organic-and pyrite-associations,and its enrichment is attributed to the sediment source,and to a lesser extent,to hydrothermal fluids.Se is predominantly connected with organic matter in the Wulantuga Ge-poor coals.
  • 摘要：Based on geological and mining characteristics,coal mine roadways under complex conditions were divided into five types,for each type the deformation and damage characteristics of rocks surrounding roadways were analyzed.The recent developments of roadway support technologies were introduced abroad,based on the experiences of supports for deep and complex roadways from Germany,the United States and Australia.The history and achievements of roadway support technologies in China were detailed,including rock bolting,steel supports,grouting reinforcement and combined supports.Four typical support and reinforcement case studies were analyzed,including a high stressed roadway 1,000 m below the surface,a roadway surrounded by severely weak and broken rocks,a chamber surrounded by weak and broken rocks,and a roadway with very soft and swelling rocks.Based on studies and practices in many years,rock bolting has become the mainstream roadway support form in China coal mines,and steel supports,grouting reinforcement and combined supports have also been applied at proper occasions,which have provided reliable technical measures for the safe and high effective construction and mining of underground coal mines.
  • 摘要：As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types,including induced by primary dynamic stress,mainly induced by dynamic stress,and by dynamic stress in low critical stress state.The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained.Moreover,theories and technologies at home and abroad were summarized concerning the monitoring,forecasting,and preventing of rockburst.These mainly include the zoning and leveling forecasting method,electromagnetic radiation technology,elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring,as well as the intensity weakening theory,the strong-soft-strong structure effect,the directional hydraulic fracturing technology,the roadway support system in regards of rockburst prevention.The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass.It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone.In addition,the monitoring and prevention of rockburst should be based on rockburst mechanism.
  • 摘要：With the increasing exploitation scope and intensity,the shallow resources would be exhausted in the future;and the deep mining will become an essential choice.In deep tunnel engineering,the heat-harm becomes one of the mainbariers.Investigations on high temperature coal mine have been done in Nothem China,with the construting of threemodels of high temperature mines suffering heat-harm,at the Jiahe mine,Sanhejian mine and Zhangshuanglou mine.Thedomestic and abroad cooling technologies of the mine respectively are also summarized after comparatively analyzing theadvantages and disadvantages of each technology.Finally,we find that the high temperature exchange machinery system(HEMS)technology that use mine discharge as the cold source,is excellent to heat-ham control in deep mines.Taking theJiahe coal mine as an example,we systematically introduce this teclnology by disposing three main workstations.HEMStechnology with its operations and functions in different exploitation levels are accomplished,including the extraction ofrefrigerating output,the transportation of chilled water by closed circulation line,the decompression of circulation linesand equipment by pressure transformation machine,and the heat exchange and cooling of workplace by heat exchangebetween wind stream and the chilled water.The exchanged heat source from the workplace is taken to ground heating bythe circulating water which acts as a carrier.It shows that the HEMS-technology benefit in environment protection andemission reduction.Results of this project illustrate that it is efficient in heat-ham control with the temperature decrease ofthe workplace down to 26-29°C,and being 4-6°C lower than the original,and the relative humidity 5%-15%lowerthan before.It greatly improves the working environment of underground workplace suffering heat-ham of high tem-perature and high humidity.In addition,by the extracting of deep geothermal enery,ground fired boiler for heating hasbeen replaced,reducing environmental pollution.This technology is worth generalization in deep mines and related fields.
  • 摘要：This paper reports data of yttrium and rare earth(REY,or REE if Y is considered)in a Ge-poor(the average value of Ge is 0.57 μg/g)coal from the Wulantuga ore deposit,middle Inner Mongolia,northern China.The contents of yttrium and rare earth in six coal samples of the Wulantuga ore deposit were detected by inductively coupled plasma mass spectrometry.The content of yttrium and rare earth in the study area varies from 5.88 to 119.19 μg/g,with an average of 61.85 μg/g,similar to the average value for world coals.The light-REY and heavy-REY enrichments are the two major REY-enrichment types of the Ge-poor coal from the Wulantuga ore deposit,and the top and bottom parts of the coal seam have a higher content of REY than the middle part.The sources of yttrium and rare earth in the Ge-poor coal of Wulantuga may be mainly associated with terrigenous materials and natural waters enriched in yttrium and rare earth.
  • 摘要：In recent years,field trials of non-pillar longwall mining using complete backfill have been implemented successively in the Chinese coal mining industry.The objective of this paper is to get a scientific understanding of surface subsidence control effect using such techniques.It begins with a brief overview on complete backfill methods primarily used in China,followed by an analysis of collected subsidence factors under mining with complete backfill.It is concluded that non-pillar longwall panel layout cannot protect surface structures against damages at a relatively large mining height,even though complete backfill is conducted.In such cases,separated longwall panel layout should be applied,i.e.,panel width should be subcritical and stable coal pillars should be left between the adjacent panels.The proposed method takes the principles of subcritical extraction and partial extraction;in conjunction with gob backfilling,surface subsidence can be effectively mitigated,thus protecting surface buildings against mining-induced damage.A general design principle and method of separated panel layout have also been proposed.
  • 摘要：This paper discussed the petrographic characteristics of No.6 coal from the Xiaoyugou mine,Jungar Coalfield,Ordos Basin,China.10 samples(7 coal,1 parting mudstone and 2 floor mudstone)were analysed by microscopical and geochemical methods.Four maceral compositions and several associated elements parameters were selected as indicators and corresponding diagrams were drawn to explicate the sedimentary environment.The results indicate that the maceral is dominated by vitrinite and minerals are mainly kaolinite in the No.6 coal.The sedimentary facies vary from barrier island system to tidal-flat which is a deposition process of water body shallowing and the coal-forming plants are herbs and woody plants formed in swamps.
  • 摘要：Optical microscopy and scanning electron microscopy in conjunction with energy dispersed X-ray spectrometry(SEM–EDX)were used to study the minerals and the concentrations of 33 trace elements in No.6 coal from Heidaigou mine.The distributions,organic affinity and removability of 18 trace elements were studied by float-sink experiments.A determination of the maceral groups was also undertaken.A high mineral content,dominated by kaolinite,was found in No.6 coal from Heidaigou mine.The bauxite content was relatively high and it was mainly present as individual particles in fusinite lumens or was intimately intergrown with carbonate minerals.The pyrite and quartz contents were low.Some marcasite with a parallel twin structure was observed by cross-polar reflected light.A small amount of bean-like goyazite was present in the calcite.The weighted trace element content in Heidaigou formations is relatively low,which is beneficial for coal processing and utilization.The concentrations of Ga,Hg,Pb,Se,Th,Ta are relatively high compared with the average values of Chinese coals.As,Hg,Mo,Ge,Ga,Ta,Ti,W,Mn are mainly present in minerals while B,Be,Th,P,Sc,Sr,V,Y,Yb are mainly found in organic matter.As,Ge,Hg,Mo are mainly present in sulfides and Be,Th,P,Sc,Sr,Y,Yb are mainly present in inertinite.B and V are mainly present in vitrinite.The high organic affinity and the low theoretical removability of most trace elements cause difficulties in removing them during coal preparation.
  • 摘要：Environmental requirements and demands from the coal industry have resulted in a boom in briquetting technology in China.In this work,a low-volatility bituminous coal from the Changcun mine and bentonite binders are used for briquetting.The compressive strength,impact strength,and thermal stability of briquettes made using different binder concentration are determined.The morphology and distribution of binders in briquettes are studied by optical microscopy and digital image-processing technologies.The concept of roundness is introduced to indicate the pressure to which the binders are subjected during briquetting.The influences of binder morphology on briquette strength are discussed.The binders are mainly in aggregated and dispersed forms,present in similar proportions in the briquettes.Aggregated binders with large differences in size are not well-distributed.Binder roundness values are concentrated between 1.5 and 4.0,which indicates that most aggregated binders are compressed and conform well to the surfaces of coal particles.A few binders had roundness value approximating 1 or above 4,which indicated that these were under little pressure or overloaded,respectively.The relationships between briquette strength and binder morphology show that aggregated binders are detrimental to mechanical strength while dispersed binders benefit briquetting.
  • 摘要：The broad objective of this research was to improve current surface mining practices and reduce negative environmental impact of overburden removal in West Virginia(WV).The specific objectives were to(i)compare conventional surface mining method(drilling,blasting,digging,and loading)to a surface miner(SM)method,and(ii)apply the analytical hierarchy process(AHP)to help select the optimal mining method based on production,cost and environmental criteria.The design and the procedures used in this research involve five interrelated modules:(i)rock properties of overburden in WV,(ii)drilling and blasting,(iii)digging and loading,(iv)SM method,and(v)comparative analysis and selection of the optimal mining method by AHP.Results of this research indicate that application of SM method would yield higher cost of overburden removal than conventional mining methods in rocks with a high unconfined compressive strength and abrasivity.A significant advantage of SM method,where applicable,is the elimination of the negative environmental impacts associated with blasting.
  • 摘要：In order to study the mechanism of confined water inrush from coal seam floor,the main influences on permeability in the process of triaxial seepage experiments were analyzed with methods such as laboratory experiments,theoretical analysis and mechanical model calculation.The crack extension rule and the ultimate destruction form of the rock specimens were obtained.The mechanism of water inrush was explained reasonably from mechanical point of view.The practical criterion of water inrush was put forward.The results show that the rock permeability "mutation" phenomenon reflects the differences of stress state and cracks extension rate when the rock internal crack begins to extend in large-scale.The rock ultimate destruction form is related to the rock lithology and the angle between crack and principal stress.The necessary condition of floor water inrush is that the mining pressure leads to the extension and transfixion of the crack.The sufficient condition of floor water inrush is that the confined water’s expansionary stress in normal direction and shear stress in tangential direction must be larger than the internal stress in the crack.With the two conditions satisfied at the same time,the floor water inrush accident will occur.
  • 摘要：In this study,NiO/SBA-15 was prepared by both direct and post synthesis methods.TEM images revealed that NiO particles aggregated in NiO/SBA-15 obtained with post synthesis method,regardless of NiO loading.However,NiO particles were monodispersed in NiO/SBA-15 with a NiO loading of less than 15 wt%by using the direct synthesis method.In this case,NiO particles aggregated when NiO loading was over 20 wt%.TPR analysis verified that with direct synthesis method the location boundary of NiO particles on outer and pore surface could be observed clearly,whereas that could not observed in the case of post synthesis method.This indicates that the type of synthesis method displays significant effect on the location of NiO particles dispersed into the SBA-15.Producer gas conversion was carried out using NiO/SBA-15 as catalysts,which were synthesized with different synthesis methods.The gas conversion including methanation occurred at low temperature(i.e.,300-400°C)and the reverse water gas shift(RWGS)reaction at hightemperature(i.e.,400-900°C).High temperatures facilitated CO conversion to CO with CO selectivity close to 100%,regardless of the synthesis method of the used catalyst.At low temperatures the dispersion type of NiO particles affectedthe CO,conversion reaction,i.e.,monodispersed Ni0 particles gave a CO selectivity of close to 100%,similar to thatobtained at high temperature.The aggregated NiO particles resuled in a CO selectivity of less than 100%owing to CH,formation,regardless of synthesis method of catalyst.Therefore,NiO/SBA-15 obtained with direct synthesis methodfavored RWGS reaction because of high CO selectivity.NiOSBA-15 obtained with post synthesis method is suited formethanation because of high CH selectivity,and the conversion of CO,to CHa through methanation increased withincreasing NiO loading.
  • 摘要：Surface coal mines prior to 1950 in the USA were generally left without any reclamation.As government regulations advanced since then,mine operators were required to backfill the area and plant grasses or trees.After the federal Surface Mining Control and Reclamation Act(SMCRA)was passed in 1977 in the USA,mine operators were required to conduct pre-mining analyses of the site and to designate a land use that could be achieved after mining.Successful reclamation,as needed to satisfy today’s societal demands,requires engineering,design,and purposeful reconstruction of the full mining disturbance,not just its surface,and control of waters leaving the mine site.Effective reclamation on modern American coal mines is fully integrated with the mining operation.A suitable and effective postmining land use that is sustainable for future generations is crucial to the long-term success and profitability of the mining business and to the future economic benefits of the landowner.Accepted post-mining land uses in the USA are:(1)prime farmland,(2)hay land and pasture,(3)biofuel crops,(4)forestry,(5)wildlife habitat,and(6)building site development.Policies and regulations for each post-mining land use were developed and practices to achieve successful and sustainable land uses were established.Post-mining conditions should provide ecosystem services and produce lands capable of supporting societal needs in the future.
  • 摘要：Appalachian USA coal mines have been implicated as major stressors to aquatic life in headwater streams via discharge of total dissolved solids(TDS).This paper summarizes column leaching studies of spoils(n>50)and refuse and TDS effects on local water quality and biotic response.The initial pH of most materials is near-neutral.Initial specific conductance(SC)values range from 500-1,000 to >3,000 μs/cm,but 2/3 of materials drop below 500 ls/cm after several pore volumes of leaching.Studies of mining-influenced streams have found altered aquatic life,relative to natural conditions with no mining influence,at SC ranging from-200 to-700 ls/cm with depressed aquatic life consistently associated with elevated TDS;mechanisms causing such effects are under investigation.We suggest that active mine operations should be modified to place high TDS producing materials in ways that reduce contact with percolating drainage waters.
  • 摘要：In order to solve the difficult conditions of soft rock,water-trickling and hard-maintain of main air-return roadway in Tarangaole Colliery,high pretensioned stress and intensive bolt-shotcrete support program was designed and mechanical property of shotcrete layer was specially monitored through utilizing a type of concrete stress meter with oscillating chord after the program was carried out.It was indicated that,due to rock pressure and support resistance,the interior of shotcrete layer would emerge diverse stresses in axial,radial and tangential directions.With time passing internal stresses in three directions,whose average values were-0.061,0.043 and 0.517 MPa respectively,fluctuated first and then tended to stability slowly.The axial and radial stresses were relatively smaller than tangential stress which was 11,12 times the two formers respectively.Along the section of roadway,axial and tangential stresses distributed symmetrically and increased gradually from the top of arch to the waist of wall,but reduced at the foot of wall.Radial stresses reduced from the top of arch to the waist of arch first,and then increased in the waist of wall.Axial stresses were tensile substantially,except for stresses in arch vault tending to compressive,but all the radial stresses were compressive.Nevertheless,tangential stresses in the wall were compressive and tangential stresses in the arch were tensile.During the period of roadway excavating,the stress of shotcrete layer was less than its ultimate bearing capacity,with no significant stress concentration.At the end of this article,some suggests are given to shotcrete support design.
  • 摘要：This paper provides an overview of coal waste management practices with two case studies and an estimate of management cost in 2010 US dollars.Processing of as-mined coal typically results in considerable amount of coarse and fine coal processing wastes because of in-seam and out-of-seam dilution mining.Processing plant clean coal recovery values run typically 50%-80%.Trace metals and sulfur may be present in waste materials that may result in leachate water with corrosive characteristics.Water discharges may require special measures such as liner and collection systems,and treatment to neutralize acid drainage and/or water quality for trace elements.The potential for variations in coal waste production and quality depends upon mining or processing,plus the long-term methods of waste placement.The changes in waste generation rates and engineering properties of the coal waste during the life of the facility must be considered.Safe,economical and environmentally acceptable management of coal waste involves consideration of geology,soil and rock mechanics,hydrology,hydraulics,geochemistry,soil science,agronomy and environmental sciences.These support all aspects of the regulatory environment including the design and construction of earth and rock embankments and dams,as well as a wide variety of waste disposal structures.Development of impoundments is critical and require considerations of typical water-impounding dams and additional requirements of coal waste disposal impoundments.The primary purpose of a coal waste disposal facility is to dispose of unusable waste materials from mining.However,at some sites coal waste impoundments serve to provide water storage capacity for processing and flood attenuation.
  • 摘要：This study investigated the influence of precipitators and wet flue gas desulfurization equipment on characteristics of PM_(2.5)emission from coal-fired power stations.We measured size distribution and removal efficiencies,including hybrid electrostatic precipitator/bag filters(ESP/BAGs)which have rarely been studied.A bimodal distribution of particle concentrations was observed at the inlet of each precipitator.After the precipitators,particle concentrations were significantly reduced.Although a bimodal distribution was still observed,all peak positions shifted to the smaller end.The removal efficiencies of hybrid ESP/BAGs reached 99%for PM_(2.5),which is considerably higher than those for other types of precipitators.In particular,the influence of hybrid ESP/BAG operating conditions on the performance of dust removal was explored.The efficiency of hybrid ESP/BAGs decreased by 1.9%when the first electrostatic field was shut down.The concentrations and distributions of particulate matter were also measured in three coal-fired power plants before and after desulfurization devices.The results showed diverse removal efficiencies for different desulfurization towers.The reason for the difference requires further research.We estimated the influence of removal technology for particulate matter on total emissions in China.Substituting ESPs with hybrid ESP/BAGs could reduce the total emissions to 104.3 thousand tons,with 47.48 thousand tons of PM_(2.5).
  • 摘要：Minerals in the Late Permian coals from the Niuchang-Yigu mining area,Zhenxiong County,northeastern Yunnan,China,were investigated using optical microscopy and low temperature ashing plus X-ray diffraction(LTA?XRD).The results showed that minerals in the coal LTAs are mainly quartz,kaolinite,chamosite,mixed-layer illite/smectite(I/S),pyrite,and calcite,with trace amounts of marcasite,dolomite,and bassanite.The authigenic quartz generally occurs in collodetrinite or as a filling in cleats or cell cavities.This silica was mainly derived from aqueous solutions produced by the weathering of basaltic rocks in the Kangdian Upland and from hydrothermal fluids.The presence of b-quartz paramorph grains in collodetrinite probably indicates that these grains were detrital and came from a volcanic ash.Clay minerals are generally embedded in collodetrinite and occur as cell-fillings.Pyrite occurs as framboidal,anhedral,and euhedral grains and a cell-filling.The coals are high in pyrite and the high pyrite content probably results from seawater invading during the stage of peat accumulation.Calcite generally occurs as vein-fillings,indicating an epigenetic origin.
  • 摘要：The rare earth elements and yttrium(REY)of the K2 coal from the Moxinpo mine,Chongqing,were determined using inductively coupled plasma mass spectrometry(ICP-MS).The results show that REY are enriched in the K2 coal,with the average content up to 462 lg/g,much higher than average values of most coals in the world.The REY distribution patterns indicate that the light REY is enriched and show a well-pronounced Eu minimum.The fractionation of individual light-REY is higher than that of the heavy-REY.The REY distribution through the K2 coal seam shows that the top and bottom portion of the coal seam have a lower content of REY than the middle portion.Goyazite and rhabdophane were identified with a scanning electron microscope equipped with an energy-dispersed X-ray spectrometer(SEM-EDX).The REY distributions through the coal seam,SEM-EDX data and the correlation analysis between ash yields and the concentrations have revealed that the REY mainly occurs in the organic matter.The K2 coal is a potential rare-metal resource due to its high REY contents,and the coal ash could be regarded as a new and promising raw material for recovery of REY as a by-product.
  • 摘要：The research of rock properties based on its inherent microscopic to mesoscopic porous structure has drawn great attention for its potential in predicting the macroscopic behavior of rocks.An accurate reconstruction of the threedimensional porous structure is a premise for the related studies of hydraulic and mechanical properties of rocks,such as the transport properties and mechanical responses under pressures.In this paper,we present a computer procedure for reconstructing the 3D porous structure of low-permeability sandstone.Two large-size 3D models are reconstructed based on the information of a reference model which is established from computed tomography(CT)images.A self-developed finite element method is applied to analyze the nonlinear mechanical behavior of the sandstone based on its reconstructed model and to compare the results with those based on the reference model.The good consistency of the obtained mechanical responses indicates the potential of using reconstruction models to predict the influences of porous structure on the mechanical properties of low-permeability sandstone.
  • 摘要：In order to meet engineering needs of Chinese underground coal mines,a new dust-collecting fan,a device of dust separated by centrifugal force in driven cyclone passageway(DCCP)was designed.In centrifugal dust removal section(CDRS)of DCCP,a general equation is derived from the principle of force equilibrium.According to CDRS structure parameters and fan running parameters,the general equation is simplified,and the simplest equation is calculated numerically by MATLAB.The calculation results illustrate that increasing quantity of air current is against dust removal,but it is beneficial to dust removal by increasing the radius of driven spiral blade and increasing the particle diameter of coal dust.The conclusions show that the dust-collecting structure parameters coupled with the fan running parameters is a novel optimization approach to dust-collection fan for working and heading faces,which is especially suitable for Chinese underground mines.
  • 摘要：Accurate understanding the behavior of spiral rope is complicated due to their complex geometry and complex contact conditions between the wires.This study proposed the finite element models of spiral ropes subjected to tensile loads.The parametric equations developed in this paper were implemented for geometric modeling of ropes.The 3D geometric models with different twisting manner,equal diameters of wires were generated in details by using Pro/ENGINEER software.The results of the present finite element analysis were on an acceptable level of accuracy as compared with those of theoretical and experimental data.Further development is ongoing to analysis the equivalent stresses induced by twisting manner of cables.The twisting manner of wires was important to spiral ropes in the three wire layers and the outer twisting manner of wires should be contrary to that of the second layer,no matter what is the first twisting manner of wires.
  • 摘要：The discrete fracture network model is a powerful tool for fractured rock mass fluid flow simulations and supports safety assessments of coal mine hazards such as water inrush.Intersection analysis,which identifies all pairs of intersected fractures(the basic components composing the connectivity of a network),is one of its crucial procedures.This paper attempts to improve intersection analysis through parallel computing.Considering a seamless interfacing with other procedures in modeling,two algorithms are designed and presented,of which one is a completely independent parallel procedure with some redundant computations and the other is an optimized version with reduced redundancy.A numerical study indicates that both of the algorithms are practical and can significantly improve the computational performance of intersection analysis for large-scale simulations.Moreover,the preferred application conditions for the two algorithms are also discussed.
  • 摘要：The macromolecular structure of tectonically deformed coals(TDC)may be determined by the deformation mechanisms of coal.Alterations of the macromolecular structure change the pore structure of TDC and thereby impact physical properties such as porosity and permeability.This study focuses on structure and properties of TDC from the Huaibei and Huainan coal mining areas of southern North China.Relationships between the macromolecular structure and the pore structure of TDC were analyzed using techniques such as X-ray diffraction,high-resolution transmission electron microcopy,and the low-temperature nitrogen adsorption.The results indicated that the directional stress condition can cause the arrangement of basic structural units(BSU)more serious and closer.And,the orientation is stronger in ductile deformed coal than in brittle deformed coal.Tectonic deformation directly influences the macromolecular structure of coal and consequently results in dynamic metamorphism.Because the size of BSU in brittle deformed coal increases more slowly than in ductile deformed coal,frictional heating and stress-chemistry of shearing areas might play a more important role,locally altering coal structure under stress,in brittle deformed coal.Strain energy is more significant in increasing the ductile deformation of coal.Furthermore,mesopores account for larger percentage of the nano-scale pore volume in brittle deformed coals,while mesopores volume in ductile deformed coal diminishes rapidly along with an increase in the proportion of micropores and sub-micropores.This research also approved that the deformations of macromolecular structures change nano-scale pore structures,which are very important for gas adsorption and pervasion space for gas.Therefore,the exploration and development potential of coal bed methane is promising for reservoirs that are subjected to a certain degree of brittle deformation(such as schistose structure coal,mortar structure coal and cataclastic structure coal).It also holds promise for TDC resulting from wrinkle structure coal of low ductile deformation and later superimposed by brittle deformation.Other kinds of TDC suffering from strong brittle-ductile and ductile deformation,such as scale structure coal and mylonitic structure coal,are difficult problems to resolve.
  • 摘要：Coal mine safety supervision system plays an important role in the coal mine safety management in China.However,the current supervision system is established on the basis of learning the advanced experience from other developed countries.It needs to be further improved according to national conditions.Therefore,the effectiveness of coal mine safety supervision system reform on three types of collieries are assessed by using time series analysis method based on comparative analysis of the supervision system before and after the reform in this paper.The regression results show that the structural reform is not conductive to the improvement of coal mine safety situation in the short term,but conductive significantly in the long term.Specifically,the effects in township coal mines are more significant than stateowned key coal mines in the long run,but negative effects also exist in the short term.The negative effects in state-owned key coal mines are non-significant compared with township coal mines.Moreover,the regression results are analyzed from the aspects of the closure policy of illegal small township coal mines at the end of 1998 and shortage of the new supervision system.Finally,the suggestions on improving the new supervision system are put forward based on the above analysis.
  • 摘要：As a country with abundant coal,lean oil and scarce gas,China has been depended too much on coal.Coal accounts for about 66%(www.zgmt.com.cn)of primary energy consumption of China in 2013.China’s raw coal output totaled 3.6 billion tons,but coal consumption approximated 4 billion tons,47.4%and 50.3%of the world’s gross coal output and consumption separately(www.BP.com).America,Australia,South Africa,Germany,Poland,Russia,India,Indonesia,Mongolia and Vietnam are also big coal producers.
  • 摘要：The reaction between carbonic acid and montmorillonite minerals was studied in order to provide a theoretical basis for analyzing changes in the physical properties of coal seams after CO_(2)injection and for optimizing CO_(2) pumping parameters.A single montmorillonite mineral of purity[90%was selected and subjected to reactions at 25,35,and 45°Cin carbonic acid solutions of varying acidity.The Si and Al concentrations in the solutions and the structure and elemental compositions of the montmorillonite before and after the reactions were analyzed using a spectrophotometer,an X-ray diffractometer,and an energy-dispersive X-ray spectrometer;kinetic reaction models were established for the dissolution of Si and Al in carbonic acid solutions in order to estimate the apparent activation energy of Si dissolution under different acidity conditions.The results indicate that Al dissolved rapidly and soon reached solubility equilibrium.On the other hand,Si concentration in the solutions increased rapidly and then gradually declined with vibrations,with maximum values at 25,35,and 45°C,which were observed at approximately 96,72,and 48 h,respectively.In addition,Si dissolution fitted the diffusion-controlled reaction model well;as the pH value decreased,the apparent activation energy of Si dissolution decreased,and Si became easier to dissolve.Furthermore,it was concluded that as a weak acid,carbonic acid causes little damage to the mineral structure of montmorillonite.
  • 摘要：Coal mining disturbed land is the main sources of land reclamation in China.With the rapid increase of economy and coal production,more and more land has been disturbed by construction and coal mining;thus,land reclamation has become highlights in the past 10 years,and China is boosting land reclamation in mining areas.Disturbance characteristics vary from region to region,according to natural and geological conditions,coal mining area land reclamation was divided into 3 zones,which are eastern,western and southern.Reclamation strategies are focused on prime farmland protection in eastern and ecological restoration in western and southern zones,respectively.Several innovative reclamation technologies and theories for the past 10 years were introduced in this paper,including concurrent mining and reclamation,Yellow river sediments backfilling,self-reclamation,and topsoil alternatives in opencast mines.Besides,in the government regulation and legal system building respect,several important laws and regulations were issued and implemented in the past 5 years,promoting land reclamation management and supervision greatly.Land reclamation is and will still be one of the most important parts of coal industry in the future,and more efforts and funds are expected to get involved.
  • 摘要：To study the impact of modern coal mining on overlying strata and its water bearing conditions,integrated time-lapse geophysical prospecting integrating 3D seismic,electrical and ground penetrating radar method were used.Through observing and analyzing the geophysical data variations of all stages of pre-mining,mining and post-mining as well as post-mining deposition stable period,impacts of coal mining on stratigraphic structure and its water bearing were studied and modern coal mining induced stratigraphic change pattern was summarized.The research result shows that the stratigraphic structure and the water bearing of surface layer during modern coal mining have self-healing pattern with mining time;the self-healing capability of near-surface strata is relatively strong while the roof weak;water bearing selfhealing of near-surface strata is relatively high while the roof strata adjacent to mined coal beds low.Due to integrated time-lapse geophysical prospecting technology has extra time dimension which makes up the deficiency of static analysis of conventional geophysical methods,it can better highlight the dynamic changes of modern coal mining induced overburden strata and its water bearing conditions.
  • 摘要：A new coal staged conversion poly-generation system combined coal combustion and pyrolysis has been developed for clean and high efficient utilization of coal.Coal is the first pyrolysed in a fluidized pyrolyzer.The pyrolysis gas is then purified and used for chemical product or liquid fuel production.Tar is collected during purification and can be processed to extract high value product and to make liquid fuels by hydro-refining.Semi-coke from the pyrolysis reactor is burned in a circulating fluidized bed(CFB)combustor for heat or power generation.The system can realize coal multiproduct generation and has a great potential to increase coal utilization value.A 1 MW poly-generation system pilot plant and a 12 MW CFB gas,tar,heat and power poly-generation system was erected.The experimental study focused on the two fluidized bed operation and characterization of gas,tar and char yields and compositions.The results showed that the system could operate stable,and produce about 0.12 m^(3)/kg gas with 22 MJ/m^(3)heating value and about 10 wt%tar when using Huainan bituminous coal under pyrolysis temperature between 500 and 600°C.The produced gases were mainly H_(2),CH_(4),CO,CO_(2),C_(2)H_(4),C_(2)H_(6),C_(3)H_(6)and C_(3)H_(8).The CFB combustor can burn semi-coke steadily.The application prospect of the new system was discussed.

    国际煤炭科学技术学报：英文版的期刊信息

    • 曾用名：煤炭学报：英文版;Journal of Coal Science & Engineering(China);煤炭学报(英文版);国际煤炭科学与采矿工程学报(英文版);煤炭学报:英文版
    • 创刊时间：1995
    • 地区：CN
    • 语言：中文
    • 热门主题：COAL MINING INDIAN COALS UNDERGROUND IN_CHINA COAL_MINE GASIFICATION ASH MINE
    • 学科分类：

      Geotechnical Engineering and Engineering Geology;Energy Engineering and Power Technology;

      Energy: Energy Engineering and Power Technology;Earth and Planetary Sciences: Geotechnical Engineering and Engineering Geology;

    国际煤炭科学技术学报：英文版的获奖情况

    • • 卓越计划期刊

    国际煤炭科学技术学报：英文版的收录情况

    • • 开放获取期刊指南
    • • 工程索引
    • • 地学数据库
    • • 哥白尼索引
    • • 生物医学检索系统
    • • 文摘与引文数据库
    • • 中国科技核心期刊

    国际煤炭科学技术学报：英文版的投稿信息

    • 投稿须知：点击查看
    • 期刊官方网站：点击前往
    • 通讯地址：China Coal Research Institute. Rm.1204, Coal Tower.Block13 Hepingjie, Chaoyang District
    • 邮编：100013
    • 联系电话：010-84262174
    • 邮箱：jcst@chinacs.org.cn
    免费订阅本刊

    客服邮箱：kefu@zhangqiaokeyan.com

    京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有 出版物经营许可证

    • 客服微信

    • 服务号