A simple method for determining independent fracture toughness and tensile strength of rock

摘要

This paper develops a model that only requires two sets of small-size rock specimens with the ratio of the structural geometry parameter maximum to minimum ae,max:ae,min≥3:1 to determine the rock fracture and strength parameters without size effect and predict the actual structural performance of rock.Regardless of three-point-bending,four-point-bending,or a combination of the above two specimen types,fracture toughness KICand tensile strength ftof rock were determined using only two sets of specimens with ae,max:ae,min≥3:1.The values KICand ftwere consistent with those determined using multiple sets of specimens.The full structural failure curve constructed by two sets of small-size specimens with ae,max:ae,min≥3:1 can accurately predict large-size specimens fracture failure,and±10%upper and lower limits of the curve can encompass the test results of large-size specimens.The peak load prediction curve was constructed by two sets of specimens with ae,max:ae,min≥3:1,and±15%upper and lower limits of the peak load prediction curve can cover the small-size specimen tests data.The model and method proposed in this paper require only two sets of small-size specimens,and their selection is unaffected by the specimen type,geometry,and initial crack length.