探讨在omniplus-190型喷气织机上生产特细号高密缎条织物的工艺调整方法.针对该品种总经根数多、织机效率低、布面质量差的问题,经过试验摸索,认为在穿筘工序采用每筘4入,在穿综工序地组织采用飞穿法、边组织采用纬重平穿法,在织造工序合理设定开口角、综框高度、开口时间、后梁、停经架、上机张力、引纬工艺等参数,可使织机效率由60%左右上升到85%左右,下机一等品率达98%.%Processing adjustment method of producing super fine high density satin stripped fabric in Omniplus-190 air-jet loom was discussed. According to the problems such as total warp number is larger,loom efficiency is lower and fabric surface is worse, through test and experiences, it is considered that 4 warp per reed was adopted in reed-in process, intermittent draw was adopted to ground weave and weft rib weave draw was adopted to edge weave in draft lifting plan process. In weaving process opening angle,heald frame height, shed time,back beam, stop frame,loom tension,weft insertion processing et al should be set properly,loom efficiency could be improve from 60% to 85% ,first grade percent-age before cloth repairing could reach 98%.
展开▼
