首页> 中文期刊> 《中国科学》 >Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs

Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs

         

摘要

The quasi-zero-stiffness(QZS)vibration isolation has been proven to be an effective way to isolate low-frequency vibration.However,most of the existing QZS isolators are space-consuming,which could not be employed in the space-limited circumstances.In this paper,a quite compact QZS isolator is engineered by connecting a pair of mutually repulsive magnet rings and a space-saving wave spring in parallel,called WQZS isolator.The restoring force of the magnet ring is derived by the equivalent magnetic charge method,and an empirical formula for the restoring force of the wave spring is derived by the least squares method based on experimental data.The dynamic model of the WQZS vibration isolation system is built,and the vibration isolation performance is evaluated through transmissibility.Finally,an experimental prototype is fabricated,and the experimental tests on frequency sweep are carried out.The results show that compared with the linear counterpart,the vibration isolation frequency of the WQZS isolator is reduced by 48.89%,and the peak transmissibility is decreased by 59.33%.Most importantly,the space occupancy of the WQZS isolator designed in this paper is much lower than that of the traditional QZS isolators,and thus it should be a potential solution for low-frequency vibration isolation in the space-limited environment.

著录项

  • 来源
    《中国科学》 |2021年第10期|P.2255-2271|共17页
  • 作者单位

    State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha 410082 ChinaCollege of Mechanical and Vehicle Engineering Hunan University Changsha 410082 China;

    State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha 410082 ChinaCollege of Mechanical and Vehicle Engineering Hunan University Changsha 410082 China;

    State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha 410082 ChinaCollege of Mechanical and Vehicle Engineering Hunan University Changsha 410082 China;

    State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha 410082 ChinaCollege of Mechanical and Vehicle Engineering Hunan University Changsha 410082 China;

    State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Changsha 410082 ChinaCollege of Mechanical and Vehicle Engineering Hunan University Changsha 410082 ChinaSchool of Mechanical and Electric Engineering Guangzhou University Guangzhou 510006 China;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 声学工程;
  • 关键词

    quasi-zero-stiffness; vibration isolator; space saving; magnet rings; wave spring;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号