首页> 中文期刊> 《中国科学》 >Fabrication and characterization of Ba Ce_(0.8)Y_(0.2)O_(2.9)-Ce_(0.85)Sm_(0.15)O_(1.925) composite electrolytes for IT-SOFCs

Fabrication and characterization of Ba Ce_(0.8)Y_(0.2)O_(2.9)-Ce_(0.85)Sm_(0.15)O_(1.925) composite electrolytes for IT-SOFCs

         

摘要

The Ba Ce0.8Y0.2O2.9-Ce0.85Sm0.15O1.925 composite electrolytes were prepared with Ba Ce0.8Y0.2O2.9(BCY) and Ce0.85Sm0.15O1.925(SDC). The SDC and BCY powders were mixed in the weight ratio of 95:5, 85:15, and 75:25, respectively(named as BS95, BS85, and BS75). Because of the composite effect between the SDC and BCY phases, the BS95 and BS85 exhibit improved conductivity compared with the pure SDC and BCY. The conductivity of BS95 is higher than that of BS85, indicating that the composite effect of BS95 is greater than that of BS85. Nevertheless, the composite effect in BS75 does not exist. Hence, we conclude that the composite effect in the BCY-SDC composites will decrease with the increase of the amount of BCY and even disappear when the amount of BCY exceeds a certain value. In our case, the optimum composition of the composite electrolyte is 95 wt% SDC and 5 wt% BCY. The BS95 has the highest conductivity(σ1t=0.07808 S cm-1, at 800 °C) and the fuel cell based on the BS95 shows the best performance(the maximum power density reaches as high as 526 mw cm-2 at 750 °C). The encouraging results suggest that the BCY-SDC composites are the very promising electrolyte materials for IT-SOFCs.

著录项

相似文献

  • 中文文献
  • 外文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号