Measurement of Attenuation of Ultrasonic Propagating through the Thin Layer Media with Time Delay Spectrum

摘要

The ultrasonic attenuation coefficient is one of the most important acoustic parameters to character the performance of a thin layer media, but it can not be measured due to mutual superposition of multiple reflected waves at the same interface in ultrasonic testing. Ultrasonic pulse echo and lamb wave to evaluate the thin layer media can not obtain attenuation coefficient at present. In this paper, analytical method was used to study the acoustics characteristic of thin layer media with the ultrasonic echo testing. Meanwhile, the process of ultrasonic attenuation measurement was presented. Simulation and experimental investigation is focused on a thin layer of rubber. Attenuation coefficient was introduced and evaluation mathematics model was established by the two echoes cross-correlation with and without the thin layer media based on the time delay spectrum. It involved the parameters related to the acoustic properties of the thin layer media. Through calculating the sound velocity and acoustic impedance with the evaluation model, it can deduce the relation between the attenuation coefficient and the frequency. Through analyzing the simulation results, it indicated that the attenuation coefficients were invariable with the varying of the frequency. However, the attenuation coefficients increased with the frequency increasing by ultrasonic testing the thin layer of rubber. The reason was that the attenuation factor was not taken into account during the simulation. This method overcomes shortcomings that the traditional ultrasonic testing can not evaluate the thin layer media whose thickness is less than motivation wavelength. It is a new solution to study the attenuation characteristic and on-line nondestructive evaluation in the thin layer media.