Finger seal is a new technology developed for gas path sealing in gas turbine engine.It has been paid attention to its good sealing performance and lower manufacture cost.The vibration behavior of finger seal is not be considered in performance analysis for the contact finger seal with compliant geometric configuration,then this will influence the reliability of the performance analysis and the parametric design of a finger seal.According to the dynamic character of finger seal,the harmonic vibration and free vibration models of a repetitive section of a two-layer finger seal that contains one high and one low finger seal are established separately.The dynamic behavior of finger seal in different working conditions is obtained based on the dynamic response analysis of finger's vibrations.The dynamic low hysteresis and low wear terms based on the equivalent dynamic model of finger seal are put forward,which can be used to predict the dynamic behavior of finger seal.As an example,the dynamic behaviors of an 8-layer finger seal and a 10-layer finger seal were predicted,and the validity of the prediction was demonstrated by the leakage test results of these two finger seals.The work presented here not only could make the dynamic analysis of finger seal with complicated structure simple and easy especially for multi-layer finger seal system,but also suggest a useful method for designing the finger seal with good dynamic behavior by means of different seal layers assembly.
展开▼
