The volumetric modulated arc therapy(VMAT)technique,in the form of RapidArc,is widely used to treat prostate cancer.The full-single arc(f-SA)technique in RapidArc planning for prostate cancer treatment provides efficient treatment,but it also delivers a higher radiation dose to the rectum.This study aimed to compare the dosimetric results from the new partial-single arc(p-SA)technique with those from the f-SA technique in RapidArc planning for prostate cancer treatment.In this study,10 patients with lowrisk prostate cancer were selected.For each patient,two sets of RapidArc plans(f-SA and p-SA)were created in the Eclipse treatment planning system.The f-SA plan was created using one full arc,and the p-SA plan was created using planning parameters identical to those of the f-SA plan but with anterior and posterior avoidance sectors.Various dosimetric parameters of the f-SA and p-SA plans were evaluated and compared for the same target coverage and identical plan optimization parameters.The f-SA and p-SA plans showed an average difference of±1%for the doses to the planning target volume(PTV),and there were no clear differences in dose homogeneity or plan conformity.In comparison to the f-SA technique,the p-SA technique reduced the doses to the rectum by approximately 6.1%to 21.2%,to the bladder by approximately 10.3%to 29.5%,and to the penile bulb by approximately 2.2%.In contrast,the dose to the femoral heads,the integral dose,and the number of monitor units were higher in the p-SA plans by approximately 34.4%,7.7%,and 9.2%,respectively.In conclusion,it is feasible to use the p-SA technique for RapidArc planning for prostate cancer treatment.For the same PTV coverage and identical plan optimization parameters,the p-SA technique is better in sparing the rectum and bladder without compromising plan conformity or target homogeneity when compared to the f-SA technique.
展开▼
