Efects of minor amounts of scandium on microstructure and mechanical properties of ZA27 alloy

摘要

The influences of minor amounts of scandium on the microstructure and mechanical properties of as-cast ZA27 alloy have been experimentally investigated.The experimental results show that as far as the Sc addition is individually concerned,the refinement result of the as-cast ZA27 alloy with 0.5wt.%Sc addition is comparatively better.After alloying with minor amounts of Sc,the coarse dendrites of the ZA27 alloy are refined and transformed into the uniform and small equiaxed grain microstructure;also the eutectics among the grain boundaries become finer.The test results of mechanical properties show that the tensile strength and hardness of the as-cast ZA27 alloy containing 0.5wt.%Sc approach 495 MPa and 120.2 HB,increase by28.5%and 33.1%,respectively,compared with those of the ZA27 alloy with no addition of Sc element,while the elongation of the alloy is improved to 7.6%from 2.7%.The SEM,EDAX and XRD analyses show that in the ZA27 alloy,the trace element Sc combines with Al to form the square Al3Sc phase particles,which serve as heterogeneous nuclei,facilitating the refinement of the microstructure and the improvement of the mechanical properties of the alloy.