For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was taken as the data-exchanged interface and source. Based on depth analysis of DXF data structure, take one drawing of DXF lathe turning rotational part asthe test piece. By VC++6.0 programming, part’s geometry information could be obtained. Through data processing, 3D data of the test piece could be generated, which is based on 2D data of DXF test piece. Then, OpenGL graphic processing technologies (light, material, texture, map, et al.) were applied on the 3D display of test piece from DXF files or program modules. Finally based on the test report, results of the system functions were shared to prove the realization of system design, and the feasibility of algorithms used. In the developed software, Machine Designers could get a full view of machine parts, and do some proper modifications. The study content and results of our work have some theory and practical significance on the application of program design in the practical projects.
展开▼
