摇摆条件下热工水力程序的研制与验证

摘要

The RELAP5/MOD3. 3 code was modified by adding a module calculating the effect of rolling motion and introducing new flow and heat transfer models. The thermal hydraulic code in rolling motion was developed. The experimental data were used to validate the theoretical models and calculation results. It is shown that the new flow and heat transfer models can correctly calculate the frictional resistance and heat transfer coefficients in rolling motion. The developed thermal hydraulic code can be used to simulate the thermal hydraulic system in rolling motion.%在RELAP5/MOD3.3程序的基础上,通过添加计算摇摆因素的模块和引入新的流动传热模型以对原程序进行修正,从而建立了摇摆条件下的热工水力分析程序.利用实验结果对理论模型和程序计算结果进行了校核和验证.结果表明:本文采用的流动传热模型可准确计算出摇摆条件下的摩擦阻力系数和传热系数,建立的热工水力分析程序也可对摇摆条件下的热工水力系统进行模拟.