核安全设备疲劳分析方法与步骤

摘要

As an example ,the fatigue analysis for the upper head of the pressurizer in one NPP was carried out by using ANSYS ,a finite element method analysis software . According to RCC-M code ,only two kinds of typical transients of temperature and pres-sure were considered in the fatigue analysis .Meanwhile ,the influence of earthquake was taken into account .The method and procedure of fatigue analysis for nuclear safety equipment were described in detail .This paper provides a reference for fatigue analysis and assessment of nuclear safety grade equipment and pipe .%以某核电厂稳压器上封头为例，采用ANSYS有限元分析软件，考虑两个有代表性的温度和压力瞬态，同时考虑地震的影响，采用RCC-M规范，进行了疲劳分析，详细说明了核安全设备疲劳分析的方法和步骤。本文为核安全设备及管道系统的疲劳分析与评价提供了参考。