首页> 外文学位 >Exploring alkaline stable organic cations for polymer hydroxide exchange membranes.
【24h】

Exploring alkaline stable organic cations for polymer hydroxide exchange membranes.

机译:探索用于聚合物氢氧化物交换膜的碱性稳定有机阳离子。

获取原文
获取原文并翻译 | 示例

摘要

Hydroxide exchange membranes (HEMs) are important polymer electrolytes for electrochemical energy conversion devices. One major concern with the practical application of HEMs is their poor alkaline stabilities which stem from the hydroxide attack on the cationic group. Accordingly, the nature of the cationic group is the top priority in terms of alkaline stability. The most used cation system, which is quaternary ammonium (QA) based, has insufficient alkaline stability for practical applications. In this study, the tertiary sulfoniums (TS) and the quaternary phosphonium (QP) were selected as two candidates to overcome the intrinsic limitation of the QA.;The triaryl-substituted TS (TAS), for the first time, was introduced as the cationic group for HEMs. The methoxy-substituted TAS based HEM exhibits reasonable alkaline stability and hydroxide conductivity. The alkaline stabilities of a series of TAS model compounds showed that more electron density on the central sulfur atom results in enhanced TAS alkaline stability. However, due to the susceptibility of the central sulfur atom to hydroxide attack, the most stable TAS cation in this study is still inferior to the benchmark cation, benzyltrimethylammonium (BTMA).;Through degradation kinetics study, Benzyl (tris(2,4,6-trimethoxyphenyl)phosphonium (BTPP-(2,4,6-MeO)) was determined to have higher alkaline stability than the benchmark, BTMA. A new multi-step degradation mechanism related to the degradation of the methoxy groups for BTPP-(2,4,6-MeO) was proposed and verified. It suggested that the elimination of the substituent degradation can further enhance the QP's alkaline stability.;By replacing methoxy substituents with methyl groups, a superior QP cation, methyl tris(2,4,6-trimethyphenyl)phosphonium (MTPP-(2,4,6-Me)) was developed. MTPP-(2,4,6-Me) demonstrated a level of stability that has not been achieved by any other known HEM cations. The alkaline degradation kinetics and mechanisms of a wide range of QPs determined that the electronic effect and steric effect combined determine the alkaline stabilities of QP cations.;To take advantage of the outstanding alkaline stability of MTPP-(2,4,6-Me), a feasible synthesis route was developed to synthesize MTPP-(2,4,6-Me) functionalized polymers for constructing HEMs.
机译:氢氧化物交换膜(HEM)是电化学能量转换装置中重要的聚合物电解质。 HEMs实际应用中的一个主要问题是它们的弱碱性稳定性,这是由于氢氧化物对阳离子基团的侵蚀所致。因此,就碱性稳定性而言,阳离子基团的性质是最优先的。最常用的基于季铵(QA)的阳离子体系对实际应用而言碱稳定性不足。在这项研究中,选择叔sulf(TS)和季phospho(QP)作为克服QA固有局限性的两个候选方案;首次引入三芳基取代的TS(TAS)作为HEM的阳离子基团。基于甲氧基取代的TAS的HEM具有合理的碱稳定性和氢氧化物传导性。一系列TAS模型化合物的碱性稳定性表明,中心硫原子上的更多电子密度导致TAS碱性稳定性增强。但是,由于中心硫原子易受氢氧化物侵蚀,因此本研究中最稳定的TAS阳离子仍不如基准阳离子苄基三甲基铵(BTMA).;通过降解动力学研究,苄基(tris(2,4,经测定,6-三甲氧基苯基)phosph(BTPP-(2,4,6-MeO))具有比基准BTMA高的碱稳定性。一种新的多步降解机理与BTPP-(( (2,4,6-MeO)的提出和验证,表明消除取代基降解可以进一步提高QP的碱稳定性;通过用甲基,更好的QP阳离子甲基三(2,4)取代甲氧基取代基开发了6-6-三甲基苯基)phosph(MTPP-(2,4,6-Me)),MTPP-(2,4,6-Me)表现出了任何其他已知的HEM阳离子都无法达到的稳定性。各种QP的碱性降解动力学和机理决定了电子效应并结合空间效应确定QP阳离子的碱性。;利用MTPP-(2,4,6-Me)的出色的碱性稳定性,开发了一种可行的合成路线来合成MTPP-(2,4,6 -Me)用于构建HEM的功能化聚合物。

著录项

  • 作者

    Zhang, Bingzi.;

  • 作者单位

    University of Delaware.;

  • 授予单位 University of Delaware.;
  • 学科 Chemical engineering.
  • 学位 Ph.D.
  • 年度 2015
  • 页码 189 p.
  • 总页数 189
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 11:52:18

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号