Dispersion correction and identification of ocean acoustic normal modes.

摘要

The average temperature of the ocean can be determined by measuring the traveltimes of acoustic signals from a source to a receiver. In the temperate deep ocean, a narrow acoustic pulse transmitted from a source results in a reception at long ranges consisting of many (possibly overlapping) arrivals. One of the mathematical structures used to describe and interpret acoustic propagation in the ocean is normal mode theory. The identification of individual normal mode arrivals in a reception is difficult because modal arrivals are spread in time by geometric dispersion causing them to overlap and interfere with each other. Current signal processing methods aimed at identifying individual normal mode arrivals require the use of vertical arrays of receivers which are rare because they are very expensive to build and deploy.; A new signal processing method using phase-only filters to compensate for the geometric dispersion of normal mode arrivals is presented. This compensation increases the peak signal to noise ratio of the individual modal arrivals while simultaneously compressing them in time, helping to isolate them and their arrival times from overlapping neighbors. The properties of the phase-only filters and their ability to help isolate and identify modal arrivals is investigated through the processing of computer simulated receptions. By processing a reception with a bank of phase-only filters characterized by different amounts of dispersion compensation, a plot dubbed the Dispersion Diagnostic (DD) Display is generated. The use of phase-only filters does not require vertical arrays of receivers because modal phase is constant across depth. DD Displays generated for a reception from a receiver at a single depth show compressed modes which are isolated from their neighbors and for which traveltimes can be determined. Thus, the dispersion processing opens up the use of horizontal arrays or single hydrophones in mode identification, broadening the capabilities of ocean acoustic researchers. It is shown that the use of DD Displays in conjunction with vertical arrays helps to improve the accuracy of the traveltime estimates for low order modes, as well as extending the number of modes the array can effectively isolate. The optimum placement of acoustic sources when dispersion processing is the goal is examined as well as the dispersion properties of sound speed profiles of varying shape. The results of processing experimental receptions made during the ATOC Alternate Source Test in July 1996 are presented which show less dispersion than expected, possibly indicating propagation characterized by significant mode coupling.