A three-dimensional biphasic finite element contact formulation for hydrated soft tissue.

摘要

A fully three-dimensional contact finite element formulation has been developed for the biological soft tissue-to-tissue contact analysis. The linear biphasic theory of Mow et al., based on continuum mixture theory, is adopted to describe the hydrated soft tissue as the continua of solid and fluid phases. Four contact continuity conditions derived for biphasic mixtures by Hou et al. are introduced on the assumed contact surface. Under the assumption of small deformation and frictionless contact, the governing differential equations and boundary conditions represent the strong form of problem.; The Galerkin weighted residual method has been applied to this strong form to derive alternate velocity-pressure finite element contact formulations. The Lagrange multiplier method is used, and enforces two of the four contact continuity conditions, while the other two conditions are introduced directly into the weighted residual statement. The alternate formulations differ in the choice of continuity conditions to enforce with Lagrange multipliers. The contact nonlinearity is treated with an iterative algorithm, where the assumed area is either extended or reduced based on the validity of the solution such as impenetrability and intensility. The resulting first order system of equations is solved in time using the generalized finite difference scheme.; In an independent study, various combinations of the Krylov iterative solvers have been tested with alternate equation re-ordering schemes and levels of pre-conditioning. An extensive study has been performed using the 3D linear biphasic equations, without contact, the results of which have provided guidance for efficiently solving the symmetric indefinite system found in the present v-p contact formulations.; A biphasic contact patch test has been used to select interpolation functions for the Lagrange multipliers and to confirm that the formulations are capable of transmitting the constant normal traction as a finite element completeness check. Then, the preferred formulation has been validated by a series of increasingly complex canonical problems including the confined and unconfined compression tests, the Hertz contact problem and two biphasic indentation tests. As a clinical demonstration of the capability of the contact analysis, the gleno-humeral joint contact of human shoulders has been analyzed using an idealized 3D geometry.