首页> 外文学位 >Investigation of thrust mechanisms in a water fed pulsed plasma thruster.
【24h】

Investigation of thrust mechanisms in a water fed pulsed plasma thruster.

机译:供水脉冲等离子推进器推力机理研究。

获取原文
获取原文并翻译 | 示例

摘要

Analytic models predict the possibility of extending the range of performance parameters of Pulsed Plasma Thrusters (PPT) by using propellants other than the traditionally used Teflon. A theoretical and experimental effort was initiated at The Ohio State University to investigate the use of alternative propellants for PPT. Analytical and numerical calculations (MACH2) indeed indicate a significant broadening of the obtainable range of specific impulse and thrust-to-power ratios when alternative propellants such as lithium or water are utilized. Consequently, in an effort to investigate changes in physical phenomena and thruster performance experimentally, a hybrid thruster was designed and built, facilitating the use of alternatively water or Teflon. The thruster design includes a unique water propellant feed system, allowing the supply of the water propellant without detrimentally affecting the inherent simplicity of the PPT system.; The thruster operation and performance was investigated by several different diagnostic methods, including current and voltage measurements, Langmuir probes, and magnetic field probes. Furthermore, impact pressure measurements in the plume of the thruster allowed new insight into the plume structure and the accurate evaluation of impulse bits. Employment of the diagnostic methods for Teflon and water propellant enabled the unambigous identification of propellant related effects such as reduced electron temperature and higher exhaust velocites in the case of water propellant.; The electromagnetic nature of the water thruster was clearly identified. For 30 J discharge energy, the water thruster requires only 5% of the mass bit of a Teflon thruster to produce an impulse bit 30% of the magnitude of the Teflon thruster, suggesting greatly increased propellant efficiencies. In agreement with the plasma diagnostic results, a specific impulse for the water thruster of up to 8000 s and efficiencies of up to 16% were evaluated.
机译:分析模型预测,通过使用除传统使用的聚四氟乙烯以外的推进剂,可以扩展脉冲等离子推进器(PPT)的性能参数范围。俄亥俄州立大学开始进行理论和实验研究,以研究替代推进剂在PPT中的使用。分析和数值计算(MACH2)的确表明,当使用替代性推进剂(例如锂或水)时,特定脉冲和推力功率比的可获得范围已大大拓宽。因此,为了通过实验研究物理现象和推进器性能的变化,设计并制造了混合推进器,以方便使用替代水或特氟隆。推进器设计包括独特的水推进剂进料系统,允许水推进剂的供应而不会不利地影响PPT系统的固有简易性。通过几种不同的诊断方法,包括电流和电压测量,Langmuir探头和磁场探头,对推进器的运行和性能进行了研究。此外,推进器羽流中的冲击压力测量结果使人们对羽流结构和脉冲钻头的准确评估有了新的认识。使用铁氟龙和水推进剂的诊断方法可以明确确定与推进剂有关的影响,例如在水推进剂的情况下降低电子温度和提高排气速度。推水器的电磁特性得到了明确识别。对于30 J的排放能量,水推进器只需要使用聚四氟乙烯推进器质量钻头的5%即可产生相当于聚四氟乙烯推进器质量的30%的脉冲钻头,这表明推进剂效率大大提高了。与血浆诊断结果一致,对推水器的特定冲量高达8000 s,效率高达16%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号