首页> 外文学位 >On the origins and outcomes of laser-nucleated bubble collapse events at high ambient pressures.
【24h】

On the origins and outcomes of laser-nucleated bubble collapse events at high ambient pressures.

机译:在高环境压力下激光成核气泡破裂事件的起源和结果。

获取原文
获取原文并翻译 | 示例

摘要

This thesis covers a range of topics related to the effects of fluid pressure on the laser nucleation of bubbles and bubble clouds in water, the collapse characteristics of those bubbles, and the outcomes of those collapses, including single and multi bubble sonoluminescence and the formation of a high pressure phase of water in the vicinity of the collapse. The disparate nature of these phenomena obscure the purposes they served in relation to a bigger project seeking to optimize the collapse of bubble clouds in connection with recent interest in acoustic inertial confinement fusion.;The laser breakdown studies sought to explain anomalous nucleation characteristics of bubble clouds at different ambient pressures. It was shown in these studies that the laser induced dielectric breakdown threshold in water is a function of pressure, and that while this was problematic insofar as it made it difficult to repeatably nucleate identical bubbles and bubble clouds, it could be utilized as a non-contact method for measuring pressures in the fluid.;The multi bubble sonoluminescence studies were initially designed to use MBSL events as markers for the collapse strength of bubble clouds in the resonators. However, when it was observed via imaging that events produced were bright, large, and long-lived, with radii and lifetimes on the order of ~300 microm and ~70 ns), respectively, the study was repeated for single bubbles. SBSL studies showed comparably large and long-lived events, with radii and lifetimes on the order of ~300 microm and ~70 ns, respectively.;SBSL studies consistently showed the formation of two ring-like structures in the vicinity of collapsing bubbles, with the radii of these rings being on the orders of 100 microm and 250 microm. Further analysis revealed that the rings formed at the location in the fluid where the pressures first exceeded 1.6 and 18 GPa, respectively. While these pressures are sufficient to generate a number of water's crystalline phases, observations suggest they are instead the result of a liquid or amorphous transition.
机译:本论文涵盖了与流体压力对水中气泡和气泡云的激光成核的影响,这些气泡的崩溃特征以及这些崩溃的结果相关的一系列主题,包括单气泡和多气泡声致发光以及水的形成。坍塌附近的高压水相。这些现象的不同性质掩盖了它们与更大的项目有关的目的,该项目旨在与最近对声惯性约束聚变的兴趣联系在一起,以寻求优化气泡云的塌陷。激光击穿研究试图解释气泡云的异常成核特性在不同的环境压力下这些研究表明,激光在水中引起的介电击穿阈值是压力的函数,虽然这是有问题的,因为它很难使相同的气泡和气泡云重复成核,但可以用作非气泡。接触式测量流体中压力的方法。多气泡声致发光研究最初被设计为使用MBSL事件作为谐振器中气泡云塌陷强度的标记。但是,当通过成像观察到所产生的事件明亮,大且寿命长,半径和寿命分别约为300微米和70 ns时,则对单个气泡重复进行该研究。 SBSL研究显示较大且长寿命的事件,半径和寿命分别约为〜300 microm和〜70 ns。这些环的半径大约为100微米和250微米。进一步的分析表明,在流体中压力首次超过1.6和18 GPa的位置分别形成了环。尽管这些压力足以产生许多水的结晶相,但观察表明它们是液体或无定形转变的结果。

著录项

  • 作者

    Sukovich, Jonathan Robert.;

  • 作者单位

    Boston University.;

  • 授予单位 Boston University.;
  • 学科 Mechanical engineering.;Plasma physics.
  • 学位 Ph.D.
  • 年度 2013
  • 页码 343 p.
  • 总页数 343
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号