首页> 外文学位 >Synthesis, solubilization, and surface functionalization of highly fluorescent quantum dots for cellular targeting through a small molecule.
【24h】

Synthesis, solubilization, and surface functionalization of highly fluorescent quantum dots for cellular targeting through a small molecule.

机译:高荧光量子点的合成,增溶和表面官能化,用于通过小分子进行细胞靶向。

获取原文
获取原文并翻译 | 示例

摘要

To achieve long-term fluorescence imaging with quantum dots (QDs), a CdSe core/shell must first be synthesized. The synthesis of bright CdSe QDs is not trivial and as a consequence, the role of surfactant in nucleation and growth was investigated. It was found that the type of surfactant used, either phosphonic or fatty acid, played a pivotal role in the size of the CdSe core. The study of surfactant on CdSe synthesis, ultimately led to an electrical passivation method that utilized a short-chained phosphonic acid and highly reactive organometallic precursors to achieve high quantum yield (QY) as has been previously described. The synthesis of QDs using organometallic precursors and a phosphonic acid for passivation resulted in 4 out of 9 batches of QDs achieving QYs greater than 50% and 8 out of 9 batches with QYs greater than 35%.;The synthesis of CdSe QDs was done in organic solutions rendering the surface of the particle hydrophobic. To perform cell-targeting experiments, QDs must be transferred to water. The transfer of QDs to water was successfully accomplished by using single acyl chain lipids. A systematic study of different lipid combinations and coatings demonstrated that 20-40 mol% single acyl chained lipids were able to transfer QDs to water resulting in monodispersed, stable QDs without adversely affecting the QY. The advantage to water solubilization using single acyl chain lipids is that the QD have a hydrodynamic radius less than 15 nm, QYs that can exceed 50% and additional surface functionalization can be down using the reactive sites incorporated into the lipid bilayer.;QDs that are bright and stable in water were studied for the purpose of targeting G protein-coupled Receptors (GPCR). GPCRs are transmembrane receptors that internalize extracellular cues, and thus mediate signal transduction. The cyclic Adenosine Monophosphate Receptor 1 of the model organism Dictyostelium disodium was the receptor of interest. The Halo protein, a genetically modified dehalogenase, was added to the N-terminus of the cAR1 receptor without resulting in a phenotype. The Halo protein fused to cAR1 was then shown to bind an organic fluorophore by the cleavage of a chloroalkane bond. Though QDs functionalized with a chloroalkane were able to bind free Halo protein, no specific binding to the Halo protein fused to cAR1 was observed.
机译:为了使用量子点(QD)进行长期荧光成像,必须首先合成CdSe核/壳。明亮的CdSe量子点的合成并非易事,因此,研究了表面活性剂在成核和生长中的作用。发现所用表面活性剂的类型(膦酸或脂肪酸)对CdSe核的尺寸起着关键作用。表面活性剂对CdSe合成的研究最终导致了一种电钝化方法,该方法利用了短链膦酸和高反应性有机金属前体来实现高量子产率(QY),如先前所述。使用有机金属前体和膦酸进行钝化的QD合成导致9批QD中的4达到QYs大于50%,9批QD中的8达到QYs大于35%。有机溶液使颗粒表面具有疏水性。要进行细胞靶向实验,必须将QD转移到水中。通过使用单酰基链脂质成功地完成了QD向水的转移。对不同脂质组合和涂层的系统研究表明,20-40 mol%的单酰基链脂质能够将QD转移到水中,从而产生单分散的稳定QD,而不会对QY产生不利影响。使用单酰基链脂质进行水溶解的优势在于,QD的流体力学半径小于15 nm,QY可以超过50%,并且使用掺入脂质双层的活性位点可以降低额外的表面官能化。为了靶向G蛋白偶联受体(GPCR),研究了在水中明亮和稳定的物质。 GPCR是跨膜受体,可内化细胞外信号,从而介导信号转导。模型生物双歧杆菌二钠的环状腺苷单磷酸受体1是目标受体。 Halo蛋白是一种经过基因修饰的脱卤酶,已添加到cAR1受体的N端,而未产生表型。然后显示出与cAR1融合的Halo蛋白通过氯代烷烃键的断裂结合了有机荧光团。尽管用氯烷烃官能化的QD能够结合游离的Halo蛋白,但未观察到与融合到cAR1的Halo蛋白的特异性结合。

著录项

  • 作者

    Galloway, Justin F.;

  • 作者单位

    The Johns Hopkins University.;

  • 授予单位 The Johns Hopkins University.;
  • 学科 Biology Cell.;Engineering Materials Science.;Nanotechnology.
  • 学位 Ph.D.
  • 年度 2013
  • 页码 193 p.
  • 总页数 193
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 11:41:01

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号