首页> 外文学位 >A one-dimensional model of blood flow in arteries with friction, convection and unsteady Taylor diffusion based on the Womersley velocity profile.
【24h】

A one-dimensional model of blood flow in arteries with friction, convection and unsteady Taylor diffusion based on the Womersley velocity profile.

机译:基于Womersley速度曲线的一维带有摩擦,对流和不稳定泰勒扩散的动脉血流模型。

获取原文
获取原文并翻译 | 示例

摘要

In this thesis, we present a one-dimensional model for blood flow in arteries, without assuming an a priori shape for the velocity profile across an artery. We combine the one-dimensional equations for conservation of mass and momentum with the Womersley model for the velocity profile in an iterative way. The pressure gradient of the one-dimensional model drives the Womersley equations, and the velocity profiles calculated then feed back into both the friction and nonlinear parts of the one-dimensional model. Besides enabling us to evaluate the friction correctly and also use the velocity profile to correct the nonlinear terms, the velocity profiles play a central role in the calculation of the effective diffusion coefficient, and convection coefficient, in the theory of Taylor diffusion. We present flow simulations using both structured tree and pure resistance models for the small arteries, and compare the resulting flow and pressure waves under various friction models. Moreover, we present several simulations where some arterial tree characteristics were altered to model two disease conditions, namely hypertension and atherosclerosis.; We consider next the problem of calculating the axial concentration profile of a solute transported by a time-dependent flow in a rigid straight pipe. This generalizes the result that Taylor derived in 1953 for calculating the axial concentration profile of a solute in a steady flow. Using asymptotic analysis, we derive a time-dependent diffusion equation for the mean concentration profile along the axial-direction in a pipe. In the special case of time-independent flow, our result reduces to that of Taylor.; Finally, we show how to couple the one-dimensional model with the unsteady Taylor diffusion limit. We use the velocity profiles calculated using the one-dimensional model to drive the unsteady Taylor diffusion equation. We present several parameter studies to show the influence of the effective diffusion coefficient on the solution of the convection-diffusion equation under study.
机译:在本文中,我们提出了一种动脉血流的一维模型,而没有假设动脉速度分布的先验形状。我们以迭代方式将用于质量和动量守恒的一维方程式与速度曲线的Womersley模型相结合。一维模型的压力梯度驱动Womersley方程,然后计算出的速度分布将反馈到一维模型的摩擦和非线性部分。除了使我们能够正确评估摩擦并使用速度分布图校正非线性项外,速度分布图在泰勒扩散理论中有效扩散系数和对流系数的计算中也起着核心作用。我们使用结构树和纯阻力模型对小动脉进行流量模拟,并比较各种摩擦模型下产生的流量和压力波。此外,我们提出了一些模拟,其中一些动脉树的特征被改变以模拟两种疾病,即高血压和动脉粥样硬化。接下来,我们考虑计算刚性直管中随时间变化的流传输的溶质的轴向浓度分布的问题。这概括了泰勒在1953年得出的用于计算稳定流中溶质的轴向浓度分布的结果。使用渐近分析,我们得出了沿管道中轴向平均浓度分布的时间相关扩散方程。在与时间无关的流动的特殊情况下,我们的结果减少到泰勒的结果。最后,我们展示了如何将一维模型与非稳态泰勒扩散极限耦合。我们使用一维模型计算出的速度分布来驱动非稳态泰勒扩散方程。我们目前进行了一些参数研究,以显示有效扩散系数对所研究的对流扩散方程解的影响。

著录项

  • 作者

    Azer, Karim.;

  • 作者单位

    New York University.;

  • 授予单位 New York University.;
  • 学科 Mathematics.; Biophysics Medical.
  • 学位 Ph.D.
  • 年度 2006
  • 页码 158 p.
  • 总页数 158
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 数学;生物物理学;
  • 关键词

  • 入库时间 2022-08-17 11:39:45

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号