首页> 外文学位 >Control relevant identification of plant and disturbance dynamics with application to noise and vibration control.
【24h】

Control relevant identification of plant and disturbance dynamics with application to noise and vibration control.

机译:控制设备的相关标识和扰动动力学,并将其应用于噪声和振动控制。

获取原文
获取原文并翻译 | 示例

摘要

Estimation of models for both plant and disturbance dynamics is important in controller design applications which especially focus on the disturbance and vibration rejection. Several methods for low order model estimation on the basis of the closed-loop data exist in the literature, but fail to address the simultaneous estimation of low order models of both plant and disturbance dynamics. This dissertation contributes to the development of a new methodology to extend the results to low order disturbance model estimation, and apply these techniques to the control problems for disturbance rejection.; In addition to the control relevant estimation problem, this dissertation also provides new tools for feedforward based disturbance rejection found in Active Noise Control (ANC) systems. We focus on the feedforward control algorithms that are one of the most popular methods to cancel low frequency sound where passive methods are ineffective. This dissertation shows that the feedforward filter design can also be seen as a model matching problem with the system model approximated on the basis of the expansion of orthonormal basis functions. Therefore, existing results on generalized FIR filters are exploited to provide feedforward compensation with the advantage of including the prior information of the system dynamics in the tapped delay line of the filter. It has the same linear parameter structure as FIR filter which is favorable for adaptation process. In the case that the acoustic coupling can not be neglected in the process of designing the feed-forward filter, a dual-Youla parametrization is introduced and applied to estimate the possible perturbation of the feedforward filter and the robust stability of the closed loop system is enforced during the design of feedforward filter for active noise cancellation.
机译:在控制器设计应用中,尤其是针对干扰和振动抑制的控制器设计应用中,植物和干扰动力学模型的估计非常重要。文献中有几种基于闭环数据的低阶模型估计方法,但是未能解决植物和扰动动力学低阶模型的同时估计问题。本论文有助于开发一种新的方法,将结果扩展到低阶扰动模型估计,并将这些技术应用于扰动抑制的控制问题。除了控制相关的估计问题外,本文还为主动噪声控制(ANC)系统中的基于前馈的干扰抑制提供了新的工具。我们专注于前馈控制算法,这是在被动方法无效的情况下消除低频声音的最流行方法之一。论文表明,前馈滤波器的设计也可以看作是一个模型匹配问题,系统模型基于正交基函数的展开近似。因此,利用在通用FIR滤波器上的现有结果来提供前馈补偿,其优点是将系统动力学的先验信息包括在滤波器的抽头延迟线中。它具有与FIR滤波器相同的线性参数结构,有利于自适应处理。在设计前馈滤波器的过程中不能忽略声耦合的情况下,引入双重Youla参数化,并将其应用于估算前馈滤波器的可能扰动,并且闭环系统的鲁棒稳定性为在前馈滤波器的设计过程中强制执行以消除主动噪声。

著录项

  • 作者

    Zeng, Jie.;

  • 作者单位

    University of California, San Diego.;

  • 授予单位 University of California, San Diego.;
  • 学科 Engineering Mechanical.
  • 学位 Ph.D.
  • 年度 2006
  • 页码 156 p.
  • 总页数 156
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 机械、仪表工业;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号