首页> 外文学位 >Modeling, simulating, and controlling the fluid dynamics of electro-wetting on dielectric.
【24h】

Modeling, simulating, and controlling the fluid dynamics of electro-wetting on dielectric.

机译:对电介质上电润湿的流体动力学进行建模,模拟和控制。

获取原文
获取原文并翻译 | 示例

摘要

This work describes the modeling and simulation of a parallel-plate Electrowetting On Dielectric (EWOD) device that moves fluid droplets through surface tension effects. The fluid dynamics are modeled by Hele-Shaw type equations with a focus on including the relevant boundary phenomena. Specifically, we include contact angle saturation, hysteresis, and contact line pinning into our model. We show that these extra boundary effects are needed to make reasonable predictions of the correct shape and time scale of droplet motion. We compare our simulation to experimental data for five different cases of droplet motion that include splitting and joining of droplets. Without these boundary effects, the simulation predicts droplet motion that is much faster than in experiment (up to 10-20 times faster).;We present two different numerical implementations of our model. The first uses a level set method, and the second uses a variational method. The level set method provides a straightforward way of simulating droplet motion with topological changes. However, the variational method was pursued for its robust handling of curvature and mass conservation, in addition to being able to easily include a phenomenological model of contact line pinning using a variational inequality. We are also able to show that the variational form of the time-discrete model satisfies a well-posedness result. Our numerical implementations are fast and are being used to design algorithms for the precise control of micro-droplet motion, mixing, and splitting.;We demonstrate micro-fluidic control by developing an algorithm to steer individual particles inside the EWOD system by control of actuators already present in the system. Particles are steered by creating time-varying flow fields that carry the particles along their desired trajectories. Results are demonstrated using the model given above. We show that the current EWOD system at the University of California in Los Angeles (UCLA) contains enough control authority to steer a single particle along arbitrary trajectories and to steer two particles, at once, along simple paths. We also show that particle steering is limited by contact angle saturation and by the small number of actuators available in the EWOD system.
机译:这项工作描述了平行板介电电润湿(EWOD)设备的建模和仿真,该设备通过表面张力效应移动液滴。流体动力学是通过Hele-Shaw型方程建模的,重点是包括相关的边界现象。具体来说,我们将接触角饱和度,磁滞和接触线钉扎到模型中。我们表明,需要这些额外的边界效应才能对液滴运动的正确形状和时间尺度做出合理的预测。我们将仿真与实验数据进行了比较,研究了五种不同的液滴运动情况,包括液滴的分裂和结合。没有这些边界效应,模拟预测的液滴运动将比实验快得多(快10到20倍)。;我们提出了模型的两种不同的数值实现。第一种使用水平设置方法,第二种使用变分方法。水平集方法提供了一种模拟具有拓扑变化的液滴运动的简单方法。然而,除了能够轻松地包括使用变分不等式的接触线钉扎现象模型外,还采用了变分方法来可靠地处理曲率和质量守恒。我们还能够证明时离散模型的变分形式满足了适定性结果。我们的数值实现很快,并且正在被用于设计算法以精确控制微滴运动,混合和分裂;我们通过开发一种算法来演示微流体控制,该算法通过控制执行器来控制EWOD系统内部的单个粒子已经存在于系统中。通过创建随时间变化的流场来控制粒子,该时变流场沿粒子的期望轨迹携带粒子。使用上面给出的模型证明了结果。我们表明,洛杉矶加利福尼亚大学(UCLA)当前的EWOD系统具有足够的控制权,可以沿任意轨迹操纵单个粒子,并可以沿简单路径同时操纵两个粒子。我们还表明,粒子转向受到接触角饱和度和EWOD系统中可用执行器数量的限制。

著录项

  • 作者

    Walker, Shawn W.;

  • 作者单位

    University of Maryland, College Park.;

  • 授予单位 University of Maryland, College Park.;
  • 学科 Engineering Aerospace.;Engineering Mechanical.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 299 p.
  • 总页数 299
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号