首页> 外文学位 >Shock tube measurements of elementary oxidation and decomposition reactions important in combustion using hydroxide, methylidyne and nitrogen-carbon-nitrogen laser absorption.
【24h】

Shock tube measurements of elementary oxidation and decomposition reactions important in combustion using hydroxide, methylidyne and nitrogen-carbon-nitrogen laser absorption.

机译:使用氢氧化物,亚甲基炔烃和氮-碳-氮激光吸收对燃烧中重要的基本氧化和分解反应的冲击管测量。

获取原文
获取原文并翻译 | 示例

摘要

The kinetics of several elementary chemical reactions that are important in fuel-combustion and pollutant-formation have been studied using laser absorption spectroscopy and shock tubes.; OH concentration profiles and ignition delay times were measured in toluene-oxygen mixtures behind reflected shock waves. The reaction between toluene and OH, (1) C6H5CH3 + OH → Products, was found to be crucial to capturing the measured OH profiles. OH laser absorption at 306 nm was used to accurately determine k1. High-sensitivity measurements of OH were also used to study several important reactions in the formaldehyde system: (2) CH2O + OH → HCO + H2O, (3) CH 2O + Ar → Products, and (4) CH2O + O2 → HCO + HO2. The low-scatter measurements provide accurate kinetic data for modeling natural gas combustion and reliable targets for theory.; The two-channel thermal decomposition of methyl radicals in argon, (5a) CH3 + Ar → CH + H2 + Ar and (5b) CH3 + Ar → CH2 + H + Ar, was studied in high-temperature shock tube experiments using CH and OH laser absorption at 431 nm and 306 nm, respectively. CH radicals were generated by shock-heating dilute mixtures of ethane or methyl iodide in an argon bath, while OH was produced by shock-heating dilute mixtures of ethane or methyl iodide and excess O2 in argon. Detailed chemical kinetic mechanisms were used to model the measurements and infer k5a and k5b.; The prompt-NO initiation reaction, (7) CH + N2 → Products, was investigated behind reflected shock waves using CH and NCN laser absorption at 431 nm and 329 nm, respectively. The overall rate coefficient of the CH+N 2 reaction was measured using a CH perturbation approach. At high temperatures, there are two possible product channels for the reaction between CH and N 2, (7a) CH + N2 → HCN + N, and (7b) CH + N2 → H + NCN. The branching ratio of reaction (7) was determined by CH laser absorption in experiments in a nitrogen bath, and establishes NCN and H as the primary products of the CH+N2 reaction. NCN was also detected by laser absorption at 329 nm and was used to study the reaction between H and NCN.
机译:已经使用激光吸收光谱和激波管研究了在燃料燃烧和污染物形成中很重要的几种基本化学反应的动力学。在反射的冲击波后面的甲苯-氧气混合物中测量了OH浓度曲线和点火延迟时间。发现甲苯和OH之间的反应(1)C6H5CH3 + OH→产物对于捕获测得的OH分布至关重要。使用306 nm的OH激光吸收来准确确定k1。 OH的高灵敏度测量还用于研究甲醛系统中的几个重要反应:(2)CH2O + OH→HCO + H2O,(3)CH 2O + Ar→产物,以及(4)CH2O + O2→HCO + HO2。低散射测量提供了用于模拟天然气燃烧的准确动力学数据,并为理论提供了可靠的目标。在高温冲击管实验中,使用CH2和CH3对氩气中的甲基自由基(5a)CH3 + Ar→CH + H2 + Ar和(5b)CH3 + Ar→CH2 + H + Ar的两通道热分解进行了研究。 OH激光分别在431 nm和306 nm处吸收。 CH自由基是通过在氩气浴中对乙烷或甲基碘的稀混合物进行冲击加热而生成的,而OH是通过在氩气中对乙烷或甲基碘和过量O2的稀混合物进行冲击加热而生成的。使用详细的化学动力学机制对测量结果进行建模并推断k5a和k5b。使用CH和NCN激光分别在431 nm和329 nm处吸收反射冲击波后,研究了NO迅速反应(7)CH + N2→产物。使用CH扰动法测量CH + N 2反应的总速率系数。在高温下,CH和N 2之间有两个可能的反应产物通道,(7a)CH + N2→HCN + N,以及(7b)CH + N2→H + NCN。反应(7)的支化率是通过在氮气浴中的实验中通过CH激光吸收来确定的,并且确定NCN和H为CH + N 2反应的主要产物。 NCN也可以通过329 nm的激光吸收来检测,并用于研究H和NCN之间的反应。

著录项

  • 作者

    Vasudevan, Venkatesh.;

  • 作者单位

    Stanford University.;

  • 授予单位 Stanford University.;
  • 学科 Engineering Mechanical.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 217 p.
  • 总页数 217
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 机械、仪表工业;
  • 关键词

  • 入库时间 2022-08-17 11:39:06

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号