首页> 外文学位 >Communications and radar signal processing for multiple base stations.
【24h】

Communications and radar signal processing for multiple base stations.

机译:多个基站的通信和雷达信号处理。

获取原文
获取原文并翻译 | 示例

摘要

This dissertation primarily focuses on design techniques for systems where multiple towers cover a given geographical area. In the first portion of this dissertation, these are communication towers and the goal is the reliable broadcast of information from these towers to mobile users. In the second portion of this dissertation, these towers are radars, and the goal is to recover the refractivity of the intervening atmosphere using phase measurements of the returned signal from various ground targets. Finally, in the third section, we depart from this general scenario and study transmission schemes on the wireless exchange channel.; In macroscopic space-time coding, the codewords are spread across antennas at wide geographical separations instead of a single antenna array, as in standard space-time coding. Since the mobile users to whom the signals are transmitted can be spread across a wide geographical region, the times of arrival of the signal from different antennas are not identical across users. In contrast to standard space-time coding, codes under such a scenario must be robust to such relative differences. This demands more rigorous code designs. The performance criterion, the optimal receiver, and a family of code designs are discussed. In particular, a constructive code design for block codes and two trellis codes are presented. A matched filter bound analysis with associated numerical and simulation results demonstrates the robustness of the proposed code designs to the relative arrival times of the signals from different transmit antennas. Then, the matched filter bound analysis is extended to demonstrate significant improvements in coverage for such a system over currently employed systems and standard space-time coding approaches applied across the same set of transmit antennas.; Retrieval of surface-layer refractivity via the method of Fabry is considered. A mathematical framework is constructed and signal processing algorithms derived that facilitate refractivity retrieval from the returns from multiple radars viewing a common geographical area. In particular, an approximate discrete model is derived to relate the measured phases to the surface layer refractivity fields, and a modified least-squares (LS) estimation algorithm is then proposed for the resulting, often ill-conditioned, inversion problem. Because the measurement technique is subject to modulo 2pi uncertainties which impact retrievals, a novel algorithm, which jointly estimates the unwrapped phases and refractive index (RI) field, is also provided. Numerical results indicate the effectiveness of the derived algorithms in both the single and multiple radar case, as well as clearly establishing that having multiple views of the same geographical area from separate radars provides for significant improvement of the RI field estimates.; Finally, the achievable rates of various transmission schemes for the exchange channel are studied. Network coding, where relay nodes combine the information received from multiple links rather than simply replicating and forwarding the received packets, has shown the promise of significantly improving system performance. In very recent works, multiple researchers have presented methods for increasing system throughput by employing network coding inspired methods to mix packets at the physical layer: physical-layer network coding (PNC). A common example used to validate much of this work is that of two sources exchanging information through a single intervening relay - a situation that we denote the "exchange channel''. In this dissertation, achievable rates of various schemes on the exchange channel are considered. Achievable rates for traditional multi-hop routing approaches, network coding approaches, and various PNC approaches are considered. A new method of PNC inspired by Tomlinson-Harashima precoding (THP), where a modulo peration is used to control the power at the relay, is introduced, and shown to have a sligh
机译:本文主要针对多塔覆盖给定地理区域的系统的设计技术。在本文的第一部分,这些是通信塔,目标是从这些塔向移动用户可靠地广播信息。在本论文的第二部分中,这些塔是雷达,目标是使用来自各种地面目标的返回信号的相位测量值来恢复中间大气的折射率。最后,在第三部分中,我们脱离了一般情况,研究了无线交换信道上的传输方案。在宏观空时编码中,与在标准空时编码中一样,码字以较宽的地理间隔分布在整个天线上,而不是单个天线阵列。由于向其发送信号的移动用户可以分布在广阔的地理区域内,因此,来自不同天线的信号到达时间在各个用户之间并不相同。与标准时空编码相反,在这种情况下的代码必须对这种相对差异具有鲁棒性。这就需要更严格的代码设计。讨论了性能标准,最佳接收器和一系列代码设计。特别地,提出了一种用于块码和两个格码的构造码设计。匹配的滤波器边界分析以及相关的数值和仿真结果证明了所提出的代码设计对于来自不同发射天线的信号的相对到达时间的鲁棒性。然后,扩展匹配滤波器的边界分析,以证明这种系统的覆盖范围大大超过了当前采用的系统和跨同一组发射天线应用的标准时空编码方法。考虑通过Fabry方法检索表面层折射率。构建了数学框架,并推导了信号处理算法,该算法有助于从查看同一地理区域的多个雷达的回波中检索折射率。特别是,推导了一个近似的离散模型,将测得的相位与表面层折射率场相关联,然后针对所产生的,通常是病态的反演问题提出了一种改进的最小二乘(LS)估计算法。由于测量技术受到2pi模不确定性的影响,因此会影响检索结果,因此还提供了一种新算法,该算法可以共同估算未包裹的相位和折射率(RI)场。数值结果表明,所推导算法在单雷达和多雷达情况下都是有效的,并且清楚地表明,从单独的雷达获得同一地理区域的多个视图可以显着改善RI场估计。最后,研究了交换信道各种传输方案可达到的速率。中继节点合并从多个链路接收到的信息,而不是简单地复制和转发接收到的数据包的网络编码已显示出显着提高系统性能的希望。在最近的工作中,许多研究人员提出了通过采用网络编码启发性方法在物理层混合数据包来提高系统吞吐量的方法:物理层网络编码(PNC)。用来验证这项工作的一个常见示例是两个源通过一个中间中继交换信息的情况-我们将这种情况称为“交换通道”。在本文中,考虑了交换通道上各种方案的可实现速率考虑了传统的多跳路由方法,网络编码方法和各种PNC方法的可实现速率,这是受Tomlinson-Harashima预编码(THP)启发的一种新的PNC方法,其中模运算用于控制中继器的功率,被介绍并显示出一定的技巧

著录项

  • 作者

    Hao, Yonggang.;

  • 作者单位

    University of Massachusetts Amherst.$bElectrical & Computer Engineering.;

  • 授予单位 University of Massachusetts Amherst.$bElectrical & Computer Engineering.;
  • 学科 Engineering Electronics and Electrical.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 114 p.
  • 总页数 114
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 无线电电子学、电信技术;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号