首页> 外文会议>Visualization, Image-Guided Procedures, and Display pt.1; Progress in Biomedical Optics and Imaging; vol.6,no.21 >Distortion Correction, Calibration, and Registration: Towards an Integrated MR and X-ray Interventional Suite
【24h】

Distortion Correction, Calibration, and Registration: Towards an Integrated MR and X-ray Interventional Suite

机译:失真校正,校准和配准:迈向集成式MR和X射线介入套件

获取原文
获取原文并翻译 | 示例

摘要

We present our co-registration results of two complementary imaging modalities, MRI and X-ray angiography (XA), using dual modality fiducial markers. Validation experiments were conducted using a vascular phantom with eight fiducial markers around its periphery. Gradient-distortion-corrected 3D MRI was used to image the phantom and determine the 3D locations of the markers. XA imaging was performed at various C-arm orientations. These images were corrected for geometric distortion, and projection parameters were optimized using a calibration phantom. Closed-form 3D-to-3D rigid-body registration was performed between the MR markers and a 3D reconstruction of the markers from multiple XA images. 3D-to-2D registration was performed using a single XA image by projecting the MR markers onto the XA image and iteratively minimizing the 2D errors between the projected markers and their observed locations in the image. The RMS registration error was 0.77 mm for the 3D-to-3D registration, and 1.53 pixels for the 3D-to-2D registration. We also showed that registration can be performed at a large IS where many markers are visible, then the image can be zoomed in maintaining the registration. This requires calibration of imperfections in the zoom operation of the image intensifier. When we applied the registration used for an IS of 330 mm to an image acquired with an IS of 130 mm, the error was 42.16 pixels before zoom correction and 3.37 pixels after. This method offers the possibility of new therapies where the soft-tissue contrast of MRI and the high-resolution imaging of XA are both needed.
机译:我们提出了使用双模态基准标记的两个互补成像模式,MRI和X射线血管造影(XA)的共同注册结果。使用在其周围具有八个基准标记的血管模型进行验证实验。使用梯度失真校正的3D MRI对体模成像并确定标记的3D位置。 XA成像是在各种C臂方向上进行的。对这些图像进行几何失真校正,并使用校准体模优化投影参数。在MR标记之间执行封闭形式的3D到3D刚体配准,并从多个XA图像对标记进行3D重建。通过将MR标记投影到XA图像上并迭代最小化投影标记与其在图像中观察到的位置之间的2D误差,使用单个XA图像执行3D到2D配准。 3D到3D配准的RMS配准误差为0.77 mm,3D到2D配准的RMS配准误差为1.53像素。我们还显示可以在可以看到许多标记的大型IS上进行配准,然后可以缩放图像以保持配准。这需要校准图像增强器的变焦操作中的瑕疵。当我们将用于330mm IS的配准应用于以130mm IS获得的图像时,误差为变焦校正之前为42.16像素,之后为3.37像素。这种方法提供了新疗法的可能性,在这些疗法中,都需要MRI的软组织对比和XA的高分辨率成像。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号