首页> 外文会议>Symposium Proceedings vol.890; Symposium on Surface Engineering for Manufacturing Applications; 20051128-1201; Boston,MA(US) >Selective protein adsorption on highly hydrophilic surface modified with combined V-UV photon and plasma irradiation
【24h】

Selective protein adsorption on highly hydrophilic surface modified with combined V-UV photon and plasma irradiation

机译:结合V-UV光子和等离子体辐射修饰的高亲水性表面上的选择性蛋白质吸附

获取原文
获取原文并翻译 | 示例

摘要

A highly hydrophilic surface, with a water contact angle smaller than 20 degrees, was rendered to a poly-methylmethacrylate [PMMA] by Xe_2 excimer lamplight and plasma treatment. In result, the implant material that was highly biocompatible and adhesive to soft tissue was developed. The PMMA surface, which had been pretreated by ammonia plasma, was irradiated with Xe_2 excimer lamplight in the presence of hydrazine as a reaction solution. In order to evaluate the wettability of the modified sample, the contact angle with water was measured. The contact angle was decreased from 83 degrees for untreated PMMA to 60 degrees when irradiated the Xe_2 lamplight for 30 minutes. With the ammonia plasma pretreatment, the contact angle of the treated sample became to 7 degrees at the 1 minute Xe_2 lamp irradiation.
机译:通过Xe_2受激准分子灯和等离子处理,将水接触角小于20度的高度亲水性表面制成聚甲基丙烯酸甲酯[PMMA]。结果,开发了高度生物相容性和对软组织的粘附性的植入物材料。在存在肼作为反应溶液的情况下,用Xe_2受激准分子灯照射已经通过氨等离子体预处理的PMMA表面。为了评估改性样品的润湿性,测量了与水的接触角。当照射Xe_2灯30分钟时,接触角从未处理的PMMA的83度降低到60度。通过氨等离子体预处理,在1分钟的Xe_2灯照射下,处理后的样品的接触角变为7度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号