Microstructural features in a laser clad TiB-Ti composite coating

摘要

The microstructure of a TiB/Ti composite coating, obtained by laser cladding a Ti-6Al-4V substrate with a Ti/TiB_2 powder mixture, was scrutinized using transmission electron microscopy (TEM). TiB showed three different morphologies: fine needles (200 nm diameter, 15 [am length), plates (thickness 1 μm, short length 3 μm and long length 15 μm) and coarse needles (diameter 3 μm and length 50 μm). All TiB is composed of both the stable B27 and the metastable B_f crystal structures. Intimate mixing of B27 and B_f is possible because B27(200) planes fit excellently on B_f(110) or (1-10) planes (with B27[010]//B_f[001]) that easily leads to stacking disorder. Aspects of disorder are quantitatively analysed using high-resolution transmission electron microscopy (HRTEM). Throughout the fine needles, extensive stacking disorder occurs. In the plates, a core of B27 (with relatively low stacking-fault density) is present, with faulted B_f on the outer surfaces that has a rough but fully faceted interface with the Ti matrix. The coarse needles consist predominantly of nearly defect-free B27. Noteworthy about the coarse needles is that they have a large core composed of Ti. On a much finer scale Ti is also dispersed in the plates and fine needles. It will be shown that the differences in microstructure among the three type of TiBmorphologies provide important clues about the evolution of the TiB under the conditions of rapid growth.