【24h】

Terawatts Femtoscond Ti:sapphine Laser System

机译:太瓦飞秒钛:蓝宝石激光系统

获取原文
获取原文并翻译 | 示例

摘要

We built this system for a customer's special order. The system started from a femtosecond pulse laser, which is an 800 nm wavelength 80 MHz modelock laser, pulse duration is less than 80 fs, pulse energy is 4 nJ, and bandwidth is 38 nm. This beam goes through a Margared and Herry stretcher and becomes a picosecond pulse train. The pulse train than amplified in a Re-Generative Amplifier pumped by a 532 nm pulse, 80 mJ 12.5 ns. The output from RGA are cavity-dumped pulses, each pulse is 10. 7 mJ, 340 ps, and bandwidth 28 nm. This pulse would four times pass a Bowtie amplifier, which was pumped by two 532 nm pulses 750 mJ each, became a 400 mJ, 340 ps pulse, the bandwidth measured is 26.5 nm. This pulse transferred to a compressor then was compressed to a 60 fs pulse and keeper 240 mJ. It was a 4 Terawatts peak power pules.
机译:我们为客户的特殊订单构建了该系统。该系统从飞秒脉冲激光器开始,该激光器是波长为800 nm的80 MHz模托克激光器,脉冲持续时间小于80 fs,脉冲能量为4 nJ,带宽为38 nm。这束光束穿过玛格丽(Margared)和哈里(Herry)担架,成为皮秒脉冲序列。然后,脉冲序列在由80 nm 12.5 ns的532 nm脉冲泵浦的再生放大器中进行了放大。 RGA的输出是腔放电脉冲,每个脉冲为10。7 mJ,340 ps,带宽为28 nm。该脉冲将四次通过Bowtie放大器,该放大器由两个分别为750 mJ的532 nm脉冲泵浦,变为400 mJ,340 ps脉冲,测得的带宽为26.5 nm。将该脉冲传送到压缩机,然后将其压缩为60 fs脉冲,并保持240 mJ。这是一个4兆瓦的峰值功率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号