There are certain technical design principles for link communication protocols which, if followed, result in a protocol that is less complex in both concept and implementation, but at the same time provides better service, than if the principles are not followed. These principles include modularization into sub-protocols, symmetry between the nodes on the link, and use of the state-exchange model of a conversation rather than the command-response model. The principles are described, the extent to which they are followed by the standard protocol X.25, level 2, is examined, and a protocol adhering to them is presented.
对于链路通信协议,存在某些技术设计原则,如果遵循这些原则,则所产生的协议在概念和实现上都不会那么复杂,但与不遵循这些原则相比,它可以提供更好的服务。这些原理包括模块化成子协议,链路上节点之间的对称性以及使用会话的状态交换模型而不是命令响应模型。描述了这些原理,并检查了标准协议X.25(第2级)在多大程度上遵循了这些原理,并提出了遵循这些原理的协议。 P>
Lawrence Livermore National Laboratory, Livermore, California;
机译:在设计协议中比较思想链接的熵测度:Linkography熵测度和不同条件的设计会话的分析
机译:利用低功耗串行通信协议改进设计调试架构,用于信号处理应用
机译:带有硅通孔的硅中介层中的差分高速串行链路的信号完整性设计和分析
机译:用于多个串行链接协议的链接控制器体系结构的设计
机译:低功耗Multi-Gb / s串行链路的分析和设计。
机译:方案:X连锁性低磷血症的亚洲患者的长期预后:SUNFLOWER纵向观察性队列研究的原理和设计
机译:PCI-E附加卡为串行链接接口定制通信协议的设计和开发 ud
机译:串行链路协议设计:对X.25标准的批判,2级