首页> 外文会议>Prognostics and System Health Management Conference >Reliability Modeling for Multi-Component systems Subject to Multiple Dependent Competing Failure Processes with Shifting Hard Failure Threshold
【24h】

Reliability Modeling for Multi-Component systems Subject to Multiple Dependent Competing Failure Processes with Shifting Hard Failure Threshold

机译:多组件系统的可靠性建模,经过多个依赖性竞争失败过程,换气阈值阈值

获取原文

摘要

For complex multi-unit systems whose sub-unit suffering multiple dependent competing failure processes (MDCFP) with shifting hard failure threshold, new multiple-component system models were developed in this paper. The previous studies about reliability analysis have focused on a single unit or simple system with s-independent failure processes and failure times. The new models are different from previous studies by extending unit-level degradation model to the system level. In this paper, each component in the system can be invalid owing to a hard failure process or a soft failure process. These failure processes mentioned-above are not only competing but also dependent and whichever happens first, the component fails. Moreover, the hard failure threshold can change due to the increment of the total degradation. Then, the reliability models for series, parallel, series-parallel system were derived respectively. Finally, numerical examples about Micro-electro-mechanical System (MEMS) are illustrated to verify the developed models and the results are effective. These models could be applied in MEMS or used in many other similar systems.
机译:对于复杂的多单元系统,其子单元遭受多个依赖竞争失败过程(MDCFP),通过转换硬故障阈值,本文开发了新的多组件系统模型。以前的关于可靠性分析的研究专注于单个单元或简单系统,具有独立的故障流程和故障时间。通过将单位级别的劣化模型扩展到系统级别,新模型与先前的研究不同。在本文中,由于硬故障过程或软故障过程,系统中的每个组件都无效。上述这些故障过程不仅竞争而且还依赖,而且首先发生哪个,该组件发生故障。此外,由于总劣化的增量,硬故障阈值可能会发生变化。然后,分别推导出串联,平行,串联系统的可靠性模型。最后,示出了关于微机电系统(MEMS)的数值示例以验证开发的模型,结果是有效的。这些模型可以应用于MEMS或在许多其他类似系统中使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号