Phasor Measurement Units Use to Determine Automatic Excitation Controller Parameters of a Synchronous Generator

摘要

The subject of the article is the technique for determination of the automatic excitation controller (AEC) parameters based on measurements from phasor measurement units (PMU). This paper shows the possibility of using PMU measurements for determining the synchronous generator AEC parameters. The article considers the type of the AEC which is ARV-MT of the Russian production. By using the simulation in the hardware and software system RTDS (Real-Time Digital Simulator), PMU measurements have been obtained for different modes of the AEC operation. Processing of the results has been carried out in MATLAB. The developed technique is based on the processing of obtained measurements by optimization algorithm. As a result of the comparative analysis, the most suitable type of optimization has been chosen. The possibility of PMU measurements use for determining the AEC parameters in different modes of its operation is shown. Also, the results of application of the technique for cases of a different power level noise in the circuit is investigated. The developed technique determines the AEC parameters with a sufficient accuracy by using PMU measurements. Thus, the technique allows one to extend the field of PMU application, and, being further developed, will allow one to monitor the AEC and calculate its parameters in real time.