首页> 外文会议>Conference on physics of medical imaging >Detectable change of lung nodule volume with CT in a phantom study with high and low signal to background contrast
【24h】

Detectable change of lung nodule volume with CT in a phantom study with high and low signal to background contrast

机译:肺结核体积的可检测变化用高低信号与幻影研究中的CT与背景对比度

获取原文

摘要

In previous work we developed a method for predicting the minimum detectable change (MDC) in nodule volume based on volumetric CT measurements. MDC was defined as the minimum increase/decrease in a nodule volume distinguishable from the baseline measurement at a specified level of detection performance, assessed using the area under the ROC curve (AUC). In this work we derived volume estimates of a set of synthetic nodules and calculated the detection performance for distinguishing them from baseline measurements. Eight spherical objects of 100HU radiodensity ranging in diameter from 5.0mm to 5.75mm and 8.0mm to 8.75mm with 0.25mm increments were placed in an anthropomorphic phantom with either no background (high-contrast task) or gelatin background (low-contrast task). The baseline was defined as 5.0mm for the first set of nodules and 8.0mm for the second set. The phantom was scanned using varying exposures, and reconstructed with slice thickness of 0.75, 1.5, and 3.0mm and two reconstruction kernels (standard and smooth). Volume measurements were derived using a previously developed matched- filter approach. Results showed that nodule size, slice thickness, and nodule-to-background contrast affected detectable change in nodule volume when using our volume estimator and the acquisition settings from our study. We also compared our experimental results to the values estimated by our previously-developed MDC prediction method. We found that experimental data for the 8mm baseline nodules matched very well with our predicted values of MDC. These results support considering the use of this metric when standardizing imaging protocols for lung nodule size change assessment.
机译:在以前的工作中,我们开发了一种方法,用于基于体积CT测量来预测结节体积中的最小可检测变化(MDC)的方法。 MDC被定义为在指定的检测性能下的基线测量中可区分的结节体积的最小增加/减少,使用ROC曲线(AUC)下的区域评估。在这项工作中,我们派生了一组合成结节的体积估计,并计算了与基线测量区别区别下的检测性能。直径为5.0mm至5.75mm和8.0mm至8.75mm的八个球形物体,均为0.25mm增量,占拟人的幻像,无需背景(高对比度任务)或明胶背景(低对比度任务) 。基线定义为第一组结节和8.0mm的5.0mm,用于第二组。使用不同的曝光扫描幽灵,并重建切片厚度为0.75,1.5和3.0mm,两个重建核(标准和光滑)。使用先前开发的匹配方法导出卷测量。结果表明,在使用我们的体积估计器和我们的研究中获取设置时,结节尺寸,切片厚度和结节背景对比度影响结节体积的可检测变化。我们还将我们的实验结果与我们以前开发的MDC预测方法估计的值进行了比较。我们发现,8mm基线结节的实验数据与我们的MDC的预测值相匹配。这些结果支持考虑使用该度量的使用,当标准化肺结节尺寸变化评估时的成像协议。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号