The use of magnetic flaw detection to control the offset of the edges of the welded joints of technological pipelines

摘要

The task was set of developing recommendations for identifying areas of displacement of the edges of the welded joints of abutting pipes, as well as identifying potentially dangerous sections of welded joints of technological pipelines by changing the normal component of the constant magnetic field. For research, 24 pipe fragments made of steel 20 with a length of 45 mm each were selected. The authors developed recommendations for identifying the presence and zone of displacement of the edges, as well as identifying potentially dangerous sections of welded joints of technological pipelines using the flux-gate control method. It is proposed to use the obtained maximum values of the normal component of the constant magnetic field for the objective detection of edge displacement zones and the determination of potentially hazardous areas. It was shown that the normal component of the constant magnetic field, is quite sensitive both to the displacement of the edges of the welded joints of the pipes and to the quality of the weld, its geometry, defectiveness and determines the above indicators with various characteristic values.