The Simulation of Rolling Lamination Forming for a Light Conveyor base on ANSYS/LS-DYNA

摘要

Rolling lamination forming of polyvinylchloride light conveyor was simulated using ANSYS12.0/LS-DYNA of FEM software. The filling condition of materials, the change of products' geometry and the plastic deformation of products during the rolling forming process were studied. And the deforming displacement curves of the product in X direction during the process were also explored and discussed deeply. A simulation method of rolling lamination forming process was established and good results were achieved, which made a contribution to the theory of rolling lamination forming and is meaningful to the mould optimization, process parameters design and product quality control.