首页> 外文会议>Conference on Advanced Materials and Devices for Sensing and Imaging >Output Characteristics of Q-switched fiber laser based on electrooptic ceramics
【24h】

Output Characteristics of Q-switched fiber laser based on electrooptic ceramics

机译:基于电光陶瓷的Q开关光纤激光输出特性

获取原文

摘要

In this paper, a novel Q-switched fiber laser made up of OptoCeramic~R electrooptic ceramics is reported. The ring laser is composed with an electrooptic ceramics modulator as Q-switched, a highly Yb-doped fiber as the gain medium, and pumped by a semiconductor laser of 976 nm wavelength. Q-switched is realized from modulating the loss, controlled by the material refractive index, which is changed with the voltage of OptoCeramic element. The laser system generates pulses about 100ns, with the repetition rate continuously adjusted from 3kHz to more than 40 kHz.
机译:本文报道,报道了由光陶瓷〜R电光陶瓷组成的新型Q开关光纤激光器。环激光用电光陶瓷调制器作为Q开关,作为增益介质的高度YB掺杂光纤,并通过976nm波长的半导体激光器泵送。 Q-Switched通过调制由材料折射率控制的损耗来实现,该折射率随着光学元件的电压而改变。激光系统产生约100ns的脉冲,重复速率从3kHz连续调节到超过40kHz。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号