首页> 外文会议>Powder Metallurgy World Congress Exhibition >A Study of Reduced and Carburized Reactions in Dry-milled WO_3+CO_3O_4+C Mixed Powders with Different Carbon Content
【24h】

A Study of Reduced and Carburized Reactions in Dry-milled WO_3+CO_3O_4+C Mixed Powders with Different Carbon Content

机译:用不同碳含量的干式研磨WO_3 + CO_3O_4 + C混合粉末中减少和渗碳反应的研究

获取原文

摘要

The dry-milling technique was used for mixing and crushing oxides and graphite powder to get homogeneous mixed powders. The weight ratio of ball-to-powder was 30:1 and argon gas was filled in jar. The carbon content was more 10 ~ 20wt% than the stoichiometric amount. The dry-milling was carried for 20 hours. After milling, the mixed powders were reduced and carburized at 900~980°C for 3 hours flowing Ar gas in tube furnace. The dry-milled powders showed wide diffraction patterns of X-ray. The reactions of reduction and carburization were completed in 3 hours at 980 °C. After the reactions, the mean size of WC particles was about 200 nm. The content of free carbon in WC/Co mixed powders decreased as the reaction temperature increased.
机译:干式铣削技术用于混合和挤压氧化物和石墨粉末以获得均匀的混合粉末。球粉的重量比为30:1,氩气中填充氩气。碳含量比化学计量量增加10〜20wt%。干式研磨成20小时。研磨后,将混合粉末减少并在900〜980℃下渗碳3小时,在管炉中流动Ar气体。干磨粉粉末显示出X射线的宽衍射图案。将还原和渗碳的反应在980℃下在3小时内完成。反应后,WC颗粒的平均尺寸约为200nm。随着反应温度的增加,WC / CO混合粉末中游离碳的含量降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号