Spray Deposition of PDMS/Candle Soot NPs Composite for Self-Cleaning Superhydrophobic Coating

摘要

The preparation of superhydrophobic coating using cheap candle soot nanoparticles(CS NPs)collected from candle flame is a very novel research topic.A less than 30 nm sized candle soot particles are collected by passing through stainless steel mesh of pore size~30 nm.An optimum suspension of CS NPs and polydimethylsiloxane(PDMS)in chloroform is sprayed on clean glass substrate and dried at 100°C for 1 hour.The coating surface with water contact angle~173° and rolling angle~ 4° is achieved by spraying suspension of 100 mg CS NPs and 0.3 mL PDMS in chloroform.The stability of superhydrophobic coating is studied by finger-wiping,water jet hitting,water dripping,adhesive tape,and sandpaper abrasion test.Result showed that the coatings prepared with an optimum 100 mg CS NPs in suspension are stable under water jet hitting and water dripping test.The superhydrophobicity is destroyed for four cycles of adhesive tape peeling and seven cycles of sandpaper abrasion tests.The coated substrate showed good self-cleaning performance.The high water repellent and self-cleaning property of the prepared coating can be adopted for industrial applications.