A finite element analysis on compressive properties of ECC with PVA fibers

机译：具有PVA纤维的ECC压缩性能的有限元分析

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

In order to analyze the compressive performance of ECC with PVA by finite element method, in this paper the three-dimensional distribution model of PVA fiber was established by compiling the random sequence program of Matlab considering the random distribution of PVA in matrix ECC. On this basis, the finite element model of ECC was established by ABAQUS software to study the stress and deformation properties of ECC with different PVA fiber content under axial compression.

机译：为了通过有限元方法分析ECC与PVA的压缩性能，本文通过编制MATLAB的随机序列程序，考虑矩阵ECC中的PVA随机分布，建立了PVA纤维的三维分布模型。在此基础上，ABAQUS软件建立了ECC的有限元模型，研究了ECC在轴压下具有不同PVA纤维含量的抗ECC的应力和变形性能。

著录项

来源
《International Conference on Mechanical Engineering and Applied Composite Materials》|2019年|356 p.|共5页
会议地点
作者
C Y Jin; Y Q Li; J C Zhu;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类工程材料学;
关键词

相似文献

外文文献
中文文献
专利

1. Finite Element Analysis on Reinforced Concrete Columns Strengthened by ECC Jacketing under Eccentric Compressive Load [J] . Mohammad Javad Memar, Ali Kheyroddin, Ali Hemmati Engineering journal . 2020,第5期

机译：ECC夹套在偏心压缩载荷下加固钢筋混凝土柱的有限元分析
2. Effect of Specimen Shapes on Compressive Strength of Engineered Cementitious Composites (ECCs) with Different Values of Water-to-Binder Ratio and PVA Fiber [J] . Chung Kwok L., Ghannam Mohamed, Zhang Chunwei Arabian Journal for Science and Engineering . 2018,第4期

机译：试件形状对水胶比和PVA纤维值不同的工程水泥复合材料抗压强度的影响
3. Structural analysis of continuous fiber wound composite impellers of a multistage high-speed counter rotating axial compressor for compressing water vapor (R-718) as refrigerant using Finite Element Analysis [J] . Mohit Patil, Norbert Mueller Materials & design . 2013,第sepa期

机译：多级高速逆转轴流压气机连续纤维缠绕复合叶轮结构的有限元分析
4. A finite element analysis on compressive properties of ECC with PVA fibers [C] . C Y Jin, Y Q Li, J C Zhu International Conference on Mechanical Engineering and Applied Composite Materials . 2019

机译：具有PVA纤维的ECC压缩性能的有限元分析
5. Modeling Transversal Support from Nanofiber Z-Threads to a Carbon Fiber by Finite Element Analysis of Multiple Carbon Fiber Reinforced Plastic (CFRP) Composite Unit Cells: A Potential Mechanism to Enhance Carbon Fiber Compressive Stability [D] . Kim, Keonhyeong 2019

机译：通过对多个碳纤维增强塑料（CFRP）复合单元电池进行有限元分析，对从纳米纤维Z螺纹到碳纤维的横向支撑进行建模：增强碳纤维压缩稳定性的潜在机制
6. Moisture Absorption/Desorption Effects on Flexural Property of Glass-Fiber-Reinforced Polyester Laminates: Three-Point Bending Test and Coupled Hygro-Mechanical Finite Element Analysis [O] . Xu Jiang, Jie Song, Xuhong Qiang, 2016

机译：水分吸收/解吸对玻璃纤维增强聚酯层压板弯曲性能的影响：三点弯曲试验和湿力学有限元分析
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Comportamento Meccanico di Steli Protesici Femorali: Analisi con il Metodo Delgi Elementi Finiti a Supporto delle Prove Meccaniche a Fatica (Mechanical Behaviour of Femoral Stems: Analysis by Finite Elements Method to Support Fatigue Mechanical Tests) [R] . Giacomozzi, C., Andreaus, U., Notarangelo, G., 2010

机译：Comportamento meccanico di steli protesici Femorali：analisi con il metodo Delgi Elementi Finiti a supporto delle prove meccaniche a Fatica（股骨柄的机械行为：通过有限元法分析支持疲劳机械测试）

A finite element analysis on compressive properties of ECC with PVA fibers

摘要

著录项

相似文献

相关主题

期刊订阅